刚装好ic610，启动时无法访问.cdsinit文件，请各位帮忙分析一下

phxwings · 发表于 2011-4-12 19:16:39

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

CDS.log如下：

Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/schView.toc, because Too many open files
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/schematic.toc, because Too many open files
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/schHDL.toc, because Too many open files
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/analog.toc, because Too many open files
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/stv.toc, because Too many open files
*WARNING* (lookupTag): Can't open file /home/phoenix/eda/ic610/tools/dfII/etc/context/verilogI.toc, because Too many open files
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
*Error* load: can't access file - "leBindKeys.il"
END OF SITE CUSTOMIZATION
Loading ./.cdsinit init file from the site init file.
*Error* load: can't access file - "./.cdsinit"

.cdsinit文件读写属性已经确定没有问题，不知道是怎么回事，请各位帮忙解决一下，这里先谢过了！！！

lovelaner · 发表于 2011-4-23 23:47:58

我觉的重新按一次吧，最好是看着安装教程一步一步的来

shengjun066 · 发表于 2012-1-4 15:50:01

把启动icfb目录下的.cdsinit文件删掉。OK

于春宝 · 发表于 2015-3-26 17:21:50

学习学习

fangwang85 · 发表于 2015-12-14 17:23:23

回复 1# phxwings

请问最后怎么解决的呢

没有亮的光 · 发表于 2016-10-24 23:29:29

删掉快捷键就不能用了啊

[求助] 刚装好ic610，启动时无法访问.cdsinit文件，请各位帮忙分析一下

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

站长推荐 /1