debug切换层次skill代码

rebecca2018

新手刚开始学习skill，把公司前辈们留下的代码进行了更改，功能是进行选中层次的层次切换，其中有两个工艺，希望该程序在两个工艺中都能适用，代码如下，找不到错误，不会debug，求大神们指点
hiSetBindKey("Layout" "<key>1" "convertm2tom1()")
procedure(changeLayer()
let((tech tw tv)
tw=hiGetCurrentWindow()
tv=geGetEditCellView()
tech=ciCacheLibName(tv)
if(tech == "s18_tech"
then
procedure(convertm2tom1()
prog((cw cv selObjects i)
cw=hiGetCurrentWindow()
cv=geGetEditCellView()
selObjects=geGetSelSet(cv)
for(i 0 length(selObjects)-1
selObjects~>layerNum=70
);for
return(t)
);prog
);procedure
else
procedure(convertm2tom1()
prog((cw cv selObjects i)
cw=hiGetCurrentWindow()
cv=geGetEditCellView()
selObjects=geGetSelSet(cv)
for(i 0 length(selObjects)-1
selObjects~>layerNum=44
);for
return(t)
);prog
);procedure
);if
);let
);procedure

policectsu

学习了学习了

note30933

顶一下

ncash0933

谢谢分享

tiantiankl

procedure(CCSpteSetVisible(layoutList "l")
let(()
pteSetActiveLpp(car(layersList))
pteSetNoneVisible(?panel "Layers")
foreach(layer layerList  pteSetVisible(layer t "Layers"))
)
)

zhuchaohong

非常感谢+1

cillman

Debug 要使用SKILL IDE 调试才比较好定位

fatcat1205

回复 1# rebecca2018
Sorry no Chinese input at this computer.
Finally understand the purpose of your code. To be honest, I have not seen this kind of structure before: procedure inside procedure. Theoretically this can work, but you may end up with some issue due to different user cases.


I modify your code a little bit, have not really try this code yet, it should be easier to debug.

procedure(convertm2tom1()
prog((cw cv tech selObjects i layerMun)
  cw=hiGetCurrentWindow()
  cv=geGetEditCellView()
  selObjects=geGetSelSet(cv)

  tech=ciCacheLibName(cv)
  if(tech == "s18_tech" then
    layerNum = 70
  else
    layerNum = 44
  );if

  for(i 0 length(selObjects)-1
    selObjects~>layerNum=layerNum
  );for
  return(t)
);prog
);procedure

hiSetBindKey("Layout" "<key>1" "convertm2tom1()")



The thought is simple, you define the value of layerNum by detecting the technology.
And then apply to all the selected objects.

rebecca2018

回复 5# jiangtaojack
谢谢你的提醒哦，我一直没有注意过这个问题。已经改成大写了。我去查了一下以前的代码，有些用的大写有些用的小写，貌似都能用，看来是大小写都可以的。不过标准的layout bindkey里面是用的大写。

rebecca2018

回复 4# z20102760

谢谢哦，我按你说的改了以后没有语法错误了。不过这个代码还有很多其他的问题，正在继续优化中。。。。。。