Help!on spiral inductor modeling!

tjjbraye

Hi every buddy,
I'm using VPCM from MMSIM61 in IC610 platform for modeling spiral inductor .After generating cell,I could only open layout view.But I can't open any other view such as symbol,schematic.In the CIW prompt window,it gives the following warning:
*WARNING* dbOpenCellViewByType: Design database revision (59) is not compatible with current revision (99).
So what 's wrong with me?
My component type is differential inductor and shape is octagonal with 2 ports.
Accuracy selection:Full-Wave EM Solver.
Please,anybody can help mee!
Thank you in advance!

tjjbraye

   

原帖由 zwtang 于 2009-7-8 20:46 发表

                               
登录/注册后可看大图

建议使用ASITIC+Momentum+MicrowaveOffice软件进行电感的建模。
VPCM使用较少，ECC license问题，破解版本较少。

好的
我在cadence的forum发了帖子，询问VPCM电感建模的问题
回复说今年圣诞就是VPCM/VPCD的EOL

http://www.cadence.com/community/forums/T/12893.aspx

[ 本帖最后由 tjjbraye 于 2009-7-10 16:10 编辑 ]