tsmc 130rf pdk

pickpunk · 发表于 2014-4-2 09:41:01

TSMC 0.13um CMOS Mixed-Signal/RF 1P8M/1P7M/1P6M
         SALICIDE 1.2V/2.5V/3.3V FSG PDK (w/i UTM, w/o UTM)

            TSMC 0.13um CMOS Mixed-Signal 1P5M/1P4M
                     SALICIDE 1.2V/2.5V/3.3V FSG PDK (w/i UTM, w/o UTM)

Version : V1.3b
Doc. #  : T-013-MM-SP-001-K1
Date : July 09, 2007

多谢楼主分享！！

pickpunk · 发表于 2014-4-2 09:41:44

This PDK has been tested to work with the following software versions:

  Cadence IC 5.10.41_USR2
  Assura sub-version 33.1.4_USR2
  Calibre 6.0.2.119

pickpunk · 发表于 2014-4-2 09:43:57

回复 9# chris2013

This PDK requires the following environmental variables:
"CDS_Netlisting_Mode" to be set to "Analog"
"CDSHOME" to be set to Cadence DFII installation path

This PDK has been tested to work with the following software versions:
Cadence IC 5.10.41_USR2
Assura sub-version 33.1.4_USR2
Calibre 6.0.2.119

mabas.masood · 发表于 2014-4-2 12:17:07

回复 9# chris2013

i converted to OA
if you need CDB please tell me to upload CDB version

chris2013 · 发表于 2014-4-2 18:22:39

回复 14# mabas.masood

yes i need the CDB version
thanks in advance for your help

chris2013 · 发表于 2014-4-2 18:27:57

yes please i need the CDB version
thanks in advance for your help

kevin_h · 发表于 2014-4-2 22:27:35

非常好，谢谢！找了很久了

kevin_h · 发表于 2014-4-2 22:30:48

this PDK has been tested to work with the following software  versions:

Cadence IC       5.10.41_USR2
Assura       sub-version 33.1.4_USR2
Calibre       6.0.2.119

kevin_h · 发表于 2014-4-2 23:09:20

回复 6# mabas.masood

大哥能不能给份design rule 啊？

mabas.masood · 发表于 2014-4-3 04:29:45

回复 15# chris2013

i upload cdb in
http://bbs.eetop.cn/viewthread.php?tid=441386&extra=

[其它] tsmc 130rf pdk

站长推荐 /2