『三味书屋』元旦送礼之三：The Kluwer 2002～2004(模拟部分)(A～E)

benemale

点击“Table of Content”可以看详细目录

	Analog Filters Su, K.L. 2nd ed., 2002, 424 p., Hardcover ISBN: 978-1-4020-7033-4 This item usually ships in 2-3 business days
	$109.00

About this book
|
Table of contents

About this book
Analog Filters, Second Edition covers four major fundamental types of analog filters - passive, op amp-RC, switched-capacitor, and operational transconductance amplifier-capacitor (OTA-C). (The last of these types is the major addition in the Second Edition). The emphasis is on the fundamental principles and theory of analog filters. It is targeted toward readers in telecommunications, signal processing, electronics, controls, instrumentation, bioengineering, etc. It introduces the reader to the elegant theory in the development of analog filters. Although some of the mechanical steps for generating filters are covered, the book stresses the mathematical bases and the scholastic ingenuity of analog filter theory. It should be helpful to nonspecialist electrical engineers to gain a background perspective and some basic insight to the development of real-time filters. In many modern advances in signal processing, their concepts and procedures have close links to analog filters. The material in this book will provide engineers with a better perspective and more penetrating appreciation of many modern signal-processing techniques.
Also by Kendall Su: Handbook of Tables for Elliptic-Function Filters, ISBN 0-7923-9109-8.

Written for:
Electrical and electronic engineers

[ 本帖最后由 benemale 于 2008-1-7 23:18 编辑 ]

benemale

第四和第五个附件已经重新上传并经过验证OK了，大家放心下载吧，给大家带来不便请多多包涵~~~~~

	Circuits and Systems for Wireless Communications Helfenstein, Markus; Moschytz, George S. (Eds.) 2000, 404 p., Hardcover ISBN: 978-0-7923-7722-1 Ships in 3 - 5 business days
	$259.00

About this book
|
Table of contents

About this book
This book contains revised contributions by the speakers of the 1st IEEE Workshop on Wireless Communication Circuits and Systems, held in Lucerne, Switzerland, from June 22-24, 1998. The aim of the workshop was to demonstrate the vast expertise of the CAS Society in the area of circuit and system design to the rapidly growing field of wireless communications. The workshop combined presentations by invited experts from academia and industry with panel and informal discussions. The following topics were covered: RF System Integration (single-chip systems, CMOS RF circuits), RF Front-End Circuits (CMOS RF oscillators, broadband design techniques), Wideband Conversion for Software Radio (A/D conversion issues, wideband sub-sampling, low-spurious A/D conversion), Process Technologies for Future RF Systems (Si, SiGe, GaAs, CMOS, packaging technologies), DSP for Wireless Communications (DSP algorithms, fixed-point systems, DSP for baseband applications), Blind Channel Equalization (adaptive interference suppression, design techniques, channel estimation).
A carefully selected combination of tutorial-like papers as well as papers on specialized and advanced topics is included. Thus, newcomers to the field of wireless communications will benefit from the overview of emerging technologies in circuits and systems, and specialists will benefit from the thought-provoking details presented in this book.

Chapter 1
RF System Integration
Chris Toumazou
Chapter 4
Towards the Full Integration of Wireless Front-End Circuits
Michiel Steyaert
Chapter 8
Design Study of a 900 MHz/1.8 GHz CMOS Transceiver for Dual-
Band Applications
Behzad Razavi

[ 本帖最后由 benemale 于 2008-1-7 22:58 编辑 ]

benemale

	CMOS ImagersFrom Phototransduction to Image Processing Yadid-Pecht, Orly; Etienne-Cummings, Ralph (Eds.) 2004, 250 p., Hardcover ISBN: 978-1-4020-7961-0 This item usually ships in 2-3 business days
	$169.00

About this book
|
Table of contents

About this book
This is the first book published on CMOS imagers. It covers the full chain, starting from the basic concepts of photo transduction, and continues with pixel and system examples of CMOS Active Pixel Sensor (APS) imagers.
CMOS Imagers: From Phototransduction to Image Processing contains six contributed chapters. The first three detail the basic concepts of photo transduction, modeling, evaluation, and optimization of APS. The last three continue with the description of APS design issues using a bottom-up strategy, starting from pixels and finishing with image processing systems. Various focal-plane image processing alternatives to either improve imaging or to extract visual information are presented. The book closes with a discussion of a completely non-traditional method for image noise suppression.
Targeted audiences for this work are people interested in imaging, whether from the academic, the industrial or the scientific arena. All students, engineers and technical workers interested in understanding more about the physics, the design and the potential of CMOS imagers are invited to read the book. Each chapter can also be read independently.
Written for:
Students, engineers, technical workers

[ 本帖最后由 benemale 于 2008-1-7 23:06 编辑 ]

benemale

	CMOS Logic Circuit Design Uyemura, John P. 1999, 552 p., Hardcover ISBN: 978-0-7923-8452-6 This item usually ships in 2-3 business days
	$161.00

About this book
|
Table of contents

About this book
CMOS Logic Circuit Design is an up-to-date treatment of the analysis and design of CMOS integrated digital logic circuits. It is a self- contained treatment that covers all of the important digital circuit design styles found in modern CMOS chips.
Introductory chapters on MOSFET physics and CMOS fabrication provide the background needed for a solid understanding of the circuit design techniques in the remainder of the book. Static CMOS logic design is given an in-depth treatment which covers both the analysis and design of these types of circuits. Emphasis is on analyzing circuits to understand the relationship between the design and performance in an integrated environment. Analytic models and their application are presented to provide a uniform base for the design philosophy developed in the study.
Dynamic circuit concepts such as charge sharing and charge leakage are presented in detail and then applied to dynamic logic families such as domino cascades, self-resetting logic, and dynamic single-phase designs. Differential logic families are given an entire chapter that discusses CVSL, CPL, and related design styles. Chip issues such as interconnect modeling, crosstalk, and input/output circuits round out the coverage.
CMOS Logic Circuit Design provides the reader with an opportunity to see the field in a unified manner that emphasizes solving design problems using the various logic styles available in CMOS.
CMOS Logic Circuit Design is designed to be used as both a textbook (either in the classroom or for self-study) and as a reference for the VLSI chip designer.

[ 本帖最后由 benemale 于 2008-1-7 23:09 编辑 ]

benemale

	CMOS Memory Circuits Haraszti, Tegze P. 2000, 576 p., Hardcover ISBN: 978-0-7923-7950-8 Order now, and we will ship when available. (Your credit card will not be charged until we ship).
	$213.00

About this book
|
Table of contents

About this book
CMOS Memory Circuits is a systematic and comprehensive reference work designed to aid in the understanding of CMOS memory circuits, architectures, and design techniques.
CMOS technology is the dominant fabrication method and almost the exclusive choice for semiconductor memory designers.
Both the quantity and the variety of complementary-metal-oxide-semiconductor (CMOS) memories are staggering. CMOS memories are traded as mass-products worldwide and are diversified to satisfy nearly all practical requirements in operational speed, power, size, and environmental tolerance. Without the outstanding speed, power, and packing density characteristics of CMOS memories, neither personal computing, nor space exploration, nor superior defense systems, nor many other feats of human ingenuity could be accomplished. Electronic systems need continuous improvements in speed performance, power consumption, packing density, size, weight, and costs. These needs continue to spur the rapid advancement of CMOS memory processing and circuit technologies.
CMOS Memory Circuits is essential for those who intend to (1) understand, (2) apply, (3) design and (4) develop CMOS memories.

[ 本帖最后由 benemale 于 2008-1-11 11:10 编辑 ]

benemale

	Computer Methods for Analysis of Mixed-Mode Switching Circuits Yuan, Fei, Opal, Ajoy 2004, XXXII, 352 p., Hardcover ISBN: 978-1-4020-7922-1 This item usually ships in 2-3 business days
	$139.00

About this book
|
Table of contents

About this book
Computer Methods for Analysis of Mixed-Mode Switching Circuits provides an in-depth treatment of the principles and implementation details of computer methods and numerical algorithms for analysis of mixed-mode switching circuits. Major topics include:
-Computer-oriented formulation of mixed-mode switching circuits,
-Network functions of linear and nonlinear time-varying systems,
-Numerical Laplace inversion based integration algorithms and inconsistent initial conditions,
-Time domain analysis of periodically switched linear and nonlinear circuits including response, sensitivity, noise, clock jitter, and statistical quantities,
-Time domain analysis of circuits with internally controlled switches and over-sampled sigma-delta modulators,
-Tellegen's theorem, frequency reversal theorem, and transfer function theorem of periodically switched linear circuits and their applications,
-Frequency domain analysis of periodically switched linear and nonlinear circuits including response, sensitivity, group delay, noise, and statistical quantities.

Written for:
Graduate students, computer-aided design (CAD) tool development engineers

[ 本帖最后由 benemale 于 2008-1-7 23:12 编辑 ]

benemale

	Design and Test of Integrated Inductors for RF Applications Aguilera, Jaime, Berenguer, Roc 2004, 250 p., Hardcover ISBN: 978-1-4020-7676-3 Ships in 3 - 5 business days
	$159.00

About this book
|
Table of contents

About this book
Design and Test of Integrated Inductors for RF Applications is the result of several years of research in the field of Radio-Frequency Integrated Circuit Design, specifically in the Inductor design for RF applications in conventional technologies.
One of the key elements today in the wireless industry, especially in the silicon RF integrated circuits field, is the design of high-quality passive elements. The performance of several basic circuit blocks such as low noise amplifiers, mixers and voltage controlled oscillators depends on the quality of these elements.
The work done establishes the design guidelines for the definition of the inductor's geometrical characteristics and new techniques to improve their quality. It also covers their measurement and characterisation. This fact is not always taken into account by the designers due to the lack of information in bibliography regarding to this topic. The novelty of this work lies in that it covers and studies the whole design flow of an inductor. From the definition and analysis of the physical effects that appear in them to their modelization, it covers issues such as the maximization of the quality by a correct definition of the geometry, novel aggressive design rules, a design flow for the definition of the inductor's geometry, selection of the measurement equipment, de-embedding, determination of the relation that exists between the measurement configuration and the circuit model used in the characterization, source of errors, etc.
Design and Test of Integrated Inductors for RF Applications is intended for engineers who are starting out in the design of integrated inductors, this due to the fact that it describes the whole design flow, basic selection of the geometry, optimisation of the quality by redesigning the geometry, measurement and de-embedding and characterisation. Secondly it will help the designer with much experience in this field, this due to the fact that, based on empirical data, some design rules that have been widely used by the design community have been proved to be really conservative and breaking them leads up to higher quality designs.
Written for:
Engineers who are starting out in the design of integrated inductors

[ 本帖最后由 benemale 于 2008-1-7 23:15 编辑 ]

benemale

	Design of Analog Fuzzy Logic Controllers in CMOS TechnologiesImplementation, Test and Application Dualibe, Carlos, Verleysen, M., Jespers, P. 2003, 196 p., Hardcover ISBN: 978-1-4020-7359-5 This item usually ships in 2-3 business days
	$179.00

About this book

About this book
Fuzzy Logic is a computational paradigm capable of modelling the own uncertainness of human beings. Fuzzy reasoning is nothing else than a Fuzzy Logic-based formalism for encoding human knowledge or common sense in a numerical framework. Indeed, the mathematical concepts on which Fuzzy Logic is supported are very easy to understand. In a Fuzzy Controller, human experience is codified by means of linguistic if-then rules, which compute control actions upon given conditions. Fuzzy Logic has been applied to problems that are difficult to solve mathematically. One of its main advantages lies in the fact that it offers a straightforward methodology for modelling and controlling non-linear systems, which are difficult to face by means of conventional techniques.
Nowadays, real-time applications of Fuzzy Logic in different domains are being increasingly reported. ASIC-based analog hardware becomes an interesting solution for these kinds of applications because it benefits from: savings on silicon surface and power consumption, readily accomplishment with strict timing constraints and cost-effective production. This book focuses in-depth on the VLSI CMOS implementation and application of programmable analog Fuzzy Logic Controllers following a mixed-signal philosophy. This is to say, signals are processed in the analog domain whereas programmability is achieved by means of standard digital memories.
This approach highlights the following crucial aspects:
*The comprehensive study and analysis of the main analog fuzzy operators: Fuzzy Membership Functions, T-Norm, T-CoNorm and Defuzzifier circuits.
*The study and development of mixed-signal Fuzzy Controllers architectures targeting the requirements for different applications.
*The fabrication and test of full-ended demonstrators.
*The partial fabrication and test of a prototype corresponding to a real-time Fuzzy Logic application in the field of Signal Processing.
Throughout Design of Analog Fuzzy Logic Controllers in CMOS Technologies, the authors emphasize and demonstrate the powerfulness of Fuzzy Logic for the synthesis of analog non-linear systems in a systematic approach. However, beyond the scope of Fuzzy Logic applications, the analysis of the circuits presented herein is wide-ranging. These circuits can also be employed in different kinds of applications in the field of Analog Signal Processing such as Neural Networks, Non-Linear and Linear Adaptive Filtering, Analog Computation, etc.

Written for:
Electronic and computer engineers

[ 本帖最后由 benemale 于 2008-1-7 23:16 编辑 ]

benemale

	Digital Radio Systems on a Chip  A Systems Approach Chien, Charles 2001, 536 p., Hardcover ISBN: 978-0-7923-7260-8 Ships in 3 - 5 business days
	$149.00

About this book
|
Table of contents

About this book
This book focuses on a specific engineering problem that is and will continue to be important in the forthcoming information age: namely, the need for highly integrated radio systems that can be embedded in wireless devices for various applications, including portable mobile multimedia wireless communications, wireless appliances, digital cellular, and digital cordless. Traditionally, the design of radio ICs involves a team of engineers trained in a wide range of fields that include networking, communication systems, radio propagation, digital/analog circuits, RF circuits, and process technology. However, as radio ICs become more integrated, the need for a diverse skill set and knowledge becomes essential for professionals as well as students, to broaden beyond their trained area of expertise and to become proficient in related areas. The key to designing an optimized, economical solution for radio systems on a chip hinges on the designer's thorough understanding of the complex trade-offs from communication systems down to circuits.
The purpose of this book is to provide a focused, top-down treatment of radio system IC design with an emphasis on digital radio systems that will play a dominant role in wireless communications in the 21st century.
The intended readers of this book include both engineers as well as students whose main area of interest or line of work lies in the design and integrated circuits implementation of wireless communication ICs, with an emphasis on the integration of an entire radio system on a chip.

[ 本帖最后由 benemale 于 2008-1-7 23:17 编辑 ]

benemale

	Electrothermal Analysis of VLSI Systems Yi-Kan Cheng, Ching-Han Tsai, Chin-Chi Teng, Sung-Mo (Steve) Kang 2000, 240 p., Hardcover ISBN: 978-0-7923-7861-7 Ships in 3 - 5 business days
	$149.00

About this book
|
Table of contents

About this book
Electrothermal Analysis of VLSI Systems addresses electrothermal problems in modern VLSI systems.
Part I, The Building Blocks, discusses electrothermal phenomena and the fundamental building blocks that electrothermal simulation requires (including power analysis, temperature-dependent device modeling, thermal/electrothermal simulation, and experimental setup-calibration).
Part II, The Applications, discusses three important applications of VLSI electrothermal analysis including temperature-dependent electromigration diagnosis, cell-level thermal placement and temperature-driven power and timing analysis.
Electrothermal Analysis of VLSI Systems will be useful for researchers in the fields of IC reliability analysis and physical design, as well as VLSI designers and graduate students.

[ 本帖最后由 benemale 于 2008-1-7 23:17 编辑 ]