Signal Switch Data Book

killerljj

Signal Switch Data Book

共六個部分！


Introduction
To assist component and system-design engineers in selecting Texas Instruments (TI)
standard-logic products, this application report is a synopsis of the information available from a
typical TI data sheet. Information includes a brief description of terms, definitions, and testing
procedures currently used for commercial and military specifications. Symbols, terms, and
definitions generally are in accordance with those currently agreed upon by the JEDEC Solid
State Technology Association for use in the USA and by the International Electrotechnical
Commission (IEC) for international use. This application report is organized into five main
sections:
1. Introduction
2. Top-Level Look at the TI Data Sheet. Overall layout and component parts of a data
sheet are explained.
3. Dissecting the TI Logic Data Sheet. JEDEC definition, the TI definition, an explanation,
and, where possible, helpful hints are presented for each specification term commonly found
in TI logic data sheets.
4. Logic Compatibility. Information in TI logic data sheets for determining the interface
compatibility between different logic families is explained.
5. End matter, including the Conclusion, Acknowledgments, and References sections

[ 本帖最后由 killerljj 于 2007-7-13 19:49 编辑 ]

killerljj

Signal Switch Data Book

killerljj

Signal Switch Data Book

lhlbluesky

好东西，谢谢了

ahshima

看看