linux 下做 PCB layout 不在是梦

jackyezhang

最近因为工作比较闲，就下载很多软件来玩，在 centos 7安装了最新cadence 公司的专业pcb 设计软件spb16.6 ,直接就跑起来了，经过这几天的验证，没发现有其它问题。现在发图大家看看，如果有需要我将软件网盘共享。 allegro_166_patch.tar.gz (1.72 MB , 下载次数: 69 )

2014-10-21 23:17 上传

点击文件名下载附件

alfhsu

謝謝分享!

alfhsu

請將软件网盘共享! 謝謝!

lemon_yilaguan

犀利啊

rockelin

好东西，希望分享。

YULONGUTK

回复 1# jackyezhang

老大，为啥我老是出现这个错误？可能和units.dat有关，但这个文件很少动的。多谢多谢！！我是在RHEL7下。

  Allegro PCB Design XL (legacy) 16.6 P4 Linux I64
(c) Copyright 1986-2012 Cadence Design Systems, Inc.
                All Rights Reserved.
unit specifier 'MHO' not found in UNITS environment
unit specifier 'W' not found in UNITS environment
'w/cm-degC' and 'W/M-DEGC' are not equivalent units
unit specifier 'MHO' not found in UNITS environment
unit specifier 'W' not found in UNITS environment
'w/cm-degC' and 'W/M-DEGC' are not equivalent units
unit specifier 'MHO' not found in UNITS environment
unit specifier 'W' not found in UNITS environment
'w/cm-degC' and 'W/M-DEGC' are not equivalent units
unit specifier 'MHO' not found in UNITS environment
unit specifier 'W' not found in UNITS environment
'w/cm-degC' and 'W/M-DEGC' are not equivalent units
unit specifier 'MHO' not found in UNITS environment
unit specifier 'W' not found in UNITS environment
'w/cm-degC' and 'W/M-DEGC' are not equivalent units
warning: no preferred units for 'ETCH_THICKNESS'
unit specifier 'MIL' not found in UNITS environment
warning: no preferred units for 'ETCH_THICKNESS'
unit specifier 'MIL' not found in UNITS environment
warning: no preferred units for 'ETCH_THICKNESS'
unit specifier 'MIL' not found in UNITS environment
warning: no preferred units for 'ETCH_THICKNESS'
unit specifier 'MIL' not found in UNITS environment
warning: no preferred units for 'ETCH_THICKNESS'
unit specifier 'MIL' not found in UNITS environment
Termination codes: exit=3, signal=11, errno=2

myforever

这个绝对要支持阿