|
|
马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？注册
x
///////////////////////////////////////////////////////////////////////////////
//
// Company: Xilinx
// Engineer: Karl Kurbjun and Carl Ribbing
// Date: 12/10/2009
// Design Name: PLL DRP
// Module Name: pll_drp.v
// Version: 1.1
// Target Devices: Spartan 6 Family
// Tool versions: L.68 (lin)
// Description: This calls the DRP register calculation functions and
// provides a state machine to perform PLL reconfiguration
// based on the calulated values stored in a initialized ROM.
//
// Disclaimer: XILINX IS PROVIDING THIS DESIGN, CODE, OR
// INFORMATION "AS IS" SOLELY FOR USE IN DEVELOPING
// PROGRAMS AND SOLUTIONS FOR XILINX DEVICES. BY
// PROVIDING THIS DESIGN, CODE, OR INFORMATION AS
// ONE POSSIBLE IMPLEMENTATION OF THIS FEATURE,
// APPLICATION OR STANDARD, XILINX IS MAKING NO
// REPRESENTATION THAT THIS IMPLEMENTATION IS FREE
// FROM ANY CLAIMS OF INFRINGEMENT, AND YOU ARE
// RESPONSIBLE FOR OBTAINING ANY RIGHTS YOU MAY
// REQUIRE FOR YOUR IMPLEMENTATION. XILINX
// EXPRESSLY DISCLAIMS ANY WARRANTY WHATSOEVER WITH
// RESPECT TO THE ADEQUACY OF THE IMPLEMENTATION,
// INCLUDING BUT NOT LIMITED TO ANY WARRANTIES OR
// REPRESENTATIONS THAT THIS IMPLEMENTATION IS FREE
// FROM CLAIMS OF INFRINGEMENT, IMPLIED WARRANTIES
// OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
// PURPOSE.
//
// (c) Copyright 2008 Xilinx, Inc.
// All rights reserved.
//
///////////////////////////////////////////////////////////////////////////////
`timescale 1ps/1ps
module pll_drp
#(
//***********************************************************************
// State 1 Parameters - These are for the first reconfiguration state.
//***********************************************************************
// These parameters have an effect on the feedback path. A change on
// these parameters will effect all of the clock outputs.
//
// The paramaters are composed of:
// _MULT: This can be from 1 to 64. It has an effect on the VCO
// frequency which consequently, effects all of the clock
// outputs.
// _PHASE: This is the phase multiplied by 1000. For example if
// a phase of 24.567 deg was desired the input value would be
// 24567. The range for the phase is from -360000 to 360000.
parameter S1_CLKFBOUT_MULT = 1,
parameter S1_CLKFBOUT_PHASE = 0,
// The bandwidth parameter effects the phase error and the jitter filter
// capability of the MMCM. For more information on this parameter see the
// Device user guide.
parameter S1_BANDWIDTH = "LOW",
// The divclk parameter allows th einput clock to be divided before it
// reaches the phase and frequency comparitor. This can be set between
// 1 and 128.
parameter S1_DIVCLK_DIVIDE = 1,
// The following parameters describe the configuration that each clock
// output should have once the reconfiguration for state one has
// completed.
//
// The parameters are composed of:
// _DIVIDE: This can be from 1 to 128
// _PHASE: This is the phase multiplied by 1000. For example if
// a phase of 24.567 deg was desired the input value would be
// 24567. The range for the phase is from -360000 to 360000.
// _DUTY: This is the duty cycle multiplied by 100,000. For example if
// a duty cycle of .24567 was desired the input would be
// 24567.
parameter S1_CLKOUT0_DIVIDE = 1,
parameter S1_CLKOUT0_PHASE = 0,
parameter S1_CLKOUT0_DUTY = 50000,
parameter S1_CLKOUT1_DIVIDE = 1,
parameter S1_CLKOUT1_PHASE = 0,
parameter S1_CLKOUT1_DUTY = 50000,
parameter S1_CLKOUT2_DIVIDE = 1,
parameter S1_CLKOUT2_PHASE = 0,
parameter S1_CLKOUT2_DUTY = 50000,
parameter S1_CLKOUT3_DIVIDE = 1,
parameter S1_CLKOUT3_PHASE = 0,
parameter S1_CLKOUT3_DUTY = 50000,
parameter S1_CLKOUT4_DIVIDE = 1,
parameter S1_CLKOUT4_PHASE = 0,
parameter S1_CLKOUT4_DUTY = 50000,
parameter S1_CLKOUT5_DIVIDE = 1,
parameter S1_CLKOUT5_PHASE = 0,
parameter S1_CLKOUT5_DUTY = 50000,
//***********************************************************************
// State 2 Parameters - These are for the second reconfiguration state.
//***********************************************************************
// These parameters have an effect on the feedback path. A change on
// these parameters will effect all of the clock outputs.
//
// The paramaters are composed of:
// _MULT: This can be from 1 to 64. It has an effect on the VCO
// frequency which consequently, effects all of the clock
// outputs.
// _PHASE: This is the phase multiplied by 1000. For example if
// a phase of 24.567 deg was desired the input value would be
// 24567. The range for the phase is from -360000 to 360000.
parameter S2_CLKFBOUT_MULT = 1,
parameter S2_CLKFBOUT_PHASE = 0,
// The bandwidth parameter effects the phase error and the jitter filter
// capability of the MMCM. For more information on this parameter see the
// Device user guide.
parameter S2_BANDWIDTH = "LOW",
// The divclk parameter allows th einput clock to be divided before it
// reaches the phase and frequency comparitor. This can be set between
// 1 and 128.
parameter S2_DIVCLK_DIVIDE = 1,
// The following parameters describe the configuration that each clock
// output should have once the reconfiguration for state one has
// completed.
//
// The parameters are composed of:
// _DIVIDE: This can be from 1 to 128
// _PHASE: This is the phase multiplied by 1000. For example if
// a phase of 24.567 deg was desired the input value would be
// 24567. The range for the phase is from -360000 to 360000
// _DUTY: This is the duty cycle multiplied by 100,000. For example if
// a duty cycle of .24567 was desired the input would be
// 24567.
parameter S2_CLKOUT0_DIVIDE = 1,
parameter S2_CLKOUT0_PHASE = 0,
parameter S2_CLKOUT0_DUTY = 50000,
parameter S2_CLKOUT1_DIVIDE = 1,
parameter S2_CLKOUT1_PHASE = 0,
parameter S2_CLKOUT1_DUTY = 50000,
parameter S2_CLKOUT2_DIVIDE = 1,
parameter S2_CLKOUT2_PHASE = 0,
parameter S2_CLKOUT2_DUTY = 50000,
parameter S2_CLKOUT3_DIVIDE = 1,
parameter S2_CLKOUT3_PHASE = 0,
parameter S2_CLKOUT3_DUTY = 50000,
parameter S2_CLKOUT4_DIVIDE = 1,
parameter S2_CLKOUT4_PHASE = 0,
parameter S2_CLKOUT4_DUTY = 50000,
parameter S2_CLKOUT5_DIVIDE = 1,
parameter S2_CLKOUT5_PHASE = 0,
parameter S2_CLKOUT5_DUTY = 50000
) (
// These signals are controlled by user logic interface and are covered
// in more detail within the XAPP.
input SADDR,
input SEN,
input SCLK,
input RST,
output reg SRDY,
// These signals are to be connected to the PLL_ADV by port name.
// Their use matches the PLL port description in the Device User Guide.
input [15:0] DO,
input DRDY,
input LOCKED,
output reg DWE,
output reg DEN,
output reg [4:0] DADDR,
output reg [15:0] DI,
output DCLK,
output reg RST_PLL
);
// 100 ps delay for behavioral simulations
// localparam TCQ = 100;
// Make sure the memory is implemented as distributed (does not work on 11.2)
(* rom_style = "distributed" *)
reg [36:0] rom [63:0];
reg [5:0] rom_addr;
reg [36:0] rom_do;
reg next_srdy;
reg [5:0] next_rom_addr;
reg [4:0] next_daddr;
reg next_dwe;
reg next_den;
reg next_rst_pll;
reg [15:0] next_di;
// Integer used to initialize remainder of unused ROM
integer ii;
// Pass SCLK to DCLK for the PLL
assign DCLK = SCLK;
// include the PLL reconfiguration functions. This contains the constant
// functions that are used in the calculations below. This file is
// required.
`include "pll_drp_func.h"
//**************************************************************************
// State 1 Calculations
//**************************************************************************
localparam [22:0] S1_CLKFBOUT =
s6_pll_count_calc(S1_CLKFBOUT_MULT, S1_CLKFBOUT_PHASE, 50000);
localparam [22:0] S1_CLKFBOUT2 =
s6_pll_count_calc(S1_CLKFBOUT_MULT, S1_CLKFBOUT_PHASE, 50000);
localparam [9:0] S1_DIGITAL_FILT =
s6_pll_filter_lookup(S1_CLKFBOUT_MULT, S1_BANDWIDTH);
localparam [39:0] S1_LOCK =
s6_pll_lock_lookup(S1_CLKFBOUT_MULT);
localparam [22:0] S1_DIVCLK =
s6_pll_count_calc(S1_DIVCLK_DIVIDE, 0, 50000);
localparam [22:0] S1_CLKOUT0 =
s6_pll_count_calc(S1_CLKOUT0_DIVIDE, S1_CLKOUT0_PHASE, S1_CLKOUT0_DUTY);
localparam [22:0] S1_CLKOUT1 =
s6_pll_count_calc(S1_CLKOUT1_DIVIDE, S1_CLKOUT1_PHASE, S1_CLKOUT1_DUTY);
localparam [22:0] S1_CLKOUT2 =
s6_pll_count_calc(S1_CLKOUT2_DIVIDE, S1_CLKOUT2_PHASE, S1_CLKOUT2_DUTY);
localparam [22:0] S1_CLKOUT3 =
s6_pll_count_calc(S1_CLKOUT3_DIVIDE, S1_CLKOUT3_PHASE, S1_CLKOUT3_DUTY);
localparam [22:0] S1_CLKOUT4 =
s6_pll_count_calc(S1_CLKOUT4_DIVIDE, S1_CLKOUT4_PHASE, S1_CLKOUT4_DUTY);
localparam [22:0] S1_CLKOUT5 =
s6_pll_count_calc(S1_CLKOUT5_DIVIDE, S1_CLKOUT5_PHASE, S1_CLKOUT5_DUTY);
//**************************************************************************
// State 2 Calculations
//**************************************************************************
localparam [22:0] S2_CLKFBOUT =
s6_pll_count_calc(S2_CLKFBOUT_MULT, S2_CLKFBOUT_PHASE, 50000);
localparam [22:0] S2_CLKFBOUT2 =
s6_pll_count_calc(S2_CLKFBOUT_MULT, S2_CLKFBOUT_PHASE, 50000);
localparam [9:0] S2_DIGITAL_FILT =
s6_pll_filter_lookup(S2_CLKFBOUT_MULT, S2_BANDWIDTH);
localparam [39:0] S2_LOCK =
s6_pll_lock_lookup(S2_CLKFBOUT_MULT);
localparam [22:0] S2_DIVCLK =
s6_pll_count_calc(S2_DIVCLK_DIVIDE, 0, 50000);
localparam [22:0] S2_CLKOUT0 =
s6_pll_count_calc(S2_CLKOUT0_DIVIDE, S2_CLKOUT0_PHASE, S2_CLKOUT0_DUTY);
localparam [22:0] S2_CLKOUT1 =
s6_pll_count_calc(S2_CLKOUT1_DIVIDE, S2_CLKOUT1_PHASE, S2_CLKOUT1_DUTY);
localparam [22:0] S2_CLKOUT2 =
s6_pll_count_calc(S2_CLKOUT2_DIVIDE, S2_CLKOUT2_PHASE, S2_CLKOUT2_DUTY);
localparam [22:0] S2_CLKOUT3 =
s6_pll_count_calc(S2_CLKOUT3_DIVIDE, S2_CLKOUT3_PHASE, S2_CLKOUT3_DUTY);
localparam [22:0] S2_CLKOUT4 =
s6_pll_count_calc(S2_CLKOUT4_DIVIDE, S2_CLKOUT4_PHASE, S2_CLKOUT4_DUTY);
localparam [22:0] S2_CLKOUT5 =
s6_pll_count_calc(S2_CLKOUT5_DIVIDE, S2_CLKOUT5_PHASE, S2_CLKOUT5_DUTY);
initial
begin
// rom entries contain (in order) the address, a bitmask, and a bitset
//***********************************************************************
// State 1 Initialization
//***********************************************************************
rom[0] = {5'h05, 16'h50FF, S1_CLKOUT0[19], 1'b0, S1_CLKOUT0[18], 1'b0,//bits 15 down to 12
S1_CLKOUT0[16], S1_CLKOUT0[17], S1_CLKOUT0[15], S1_CLKOUT0[14], 8'h00};//bits 11 downto 0
rom[1] = {5'h06, 16'h010B, S1_CLKOUT1[4], S1_CLKOUT1[5], S1_CLKOUT1[3], S1_CLKOUT1[12], //bits 15 down to 12
S1_CLKOUT1[1], S1_CLKOUT1[2], S1_CLKOUT1[19], 1'b0, S1_CLKOUT1[17], S1_CLKOUT1[16], //bits 11 down to 6
S1_CLKOUT1[14], S1_CLKOUT1[15], 1'b0, S1_CLKOUT0[13], 2'b00}; //bits 5 down to 0
rom[2] = {5'h07, 16'hE02C, 3'b000, S1_CLKOUT1[11], S1_CLKOUT1[9], S1_CLKOUT1[10], //bits 15 down to 10
S1_CLKOUT1[8], S1_CLKOUT1[7], S1_CLKOUT1[6], S1_CLKOUT1[20], 1'b0, S1_CLKOUT1[13], //bits 9 down to 4
2'b00, S1_CLKOUT1[21], S1_CLKOUT1[22]}; //bits 3 down to 0
rom[3] = {5'h08, 16'h4001, S1_CLKOUT2[22], 1'b0, S1_CLKOUT2[5], S1_CLKOUT2[21], //bits 15 downto 12
S1_CLKOUT2[12], S1_CLKOUT2[4], S1_CLKOUT2[3], S1_CLKOUT2[2], S1_CLKOUT2[0], S1_CLKOUT2[19], //bits 11 down to 6
S1_CLKOUT2[17], S1_CLKOUT2[18], S1_CLKOUT2[15], S1_CLKOUT2[16], S1_CLKOUT2[14], 1'b0}; //bits 5 down to 0
rom[4] = {5'h09, 16'h0D03, S1_CLKOUT3[14], S1_CLKOUT3[15], S1_CLKOUT0[21], S1_CLKOUT0[22], 2'b00, S1_CLKOUT2[10], 1'b0, //bits 15 downto 8
S1_CLKOUT2[9], S1_CLKOUT2[8], S1_CLKOUT2[6], S1_CLKOUT2[7], S1_CLKOUT2[13], S1_CLKOUT2[20], 2'b00}; //bits 7 downto 0
rom[5] = {5'h0A, 16'hB001, 1'b0, S1_CLKOUT3[13], 2'b00, S1_CLKOUT3[21], S1_CLKOUT3[22], S1_CLKOUT3[5], S1_CLKOUT3[4], //bits 15 downto 8
S1_CLKOUT3[12], S1_CLKOUT3[2], S1_CLKOUT3[0], S1_CLKOUT3[1], S1_CLKOUT3[18], S1_CLKOUT3[19], //bits 7 downto 2
S1_CLKOUT3[17], 1'b0}; //bits 1 downto 0
rom[6] = {5'h0B, 16'h0110, S1_CLKOUT0[5], S1_CLKOUT4[19], S1_CLKOUT4[14], S1_CLKOUT4[17], //bits 15 downto 12
S1_CLKOUT4[15], S1_CLKOUT4[16], S1_CLKOUT0[4], 1'b0, S1_CLKOUT3[11], S1_CLKOUT3[10], //bits 11 downto 6
S1_CLKOUT3[9], 1'b0, S1_CLKOUT3[7], S1_CLKOUT3[8], S1_CLKOUT3[20], S1_CLKOUT3[6]}; //bits 5 downto 0
rom[7] = {5'h0C, 16'h0B00, S1_CLKOUT4[7], S1_CLKOUT4[8], S1_CLKOUT4[20], S1_CLKOUT4[6], 1'b0, S1_CLKOUT4[13], //bits 15 downto 10
2'b00, S1_CLKOUT4[22], S1_CLKOUT4[21], S1_CLKOUT4[4], S1_CLKOUT4[5], S1_CLKOUT4[3], //bits 9 downto 3
S1_CLKOUT4[12], S1_CLKOUT4[1], S1_CLKOUT4[2]}; //bits 2 downto 0
rom[8] = {5'h0D, 16'h0008, S1_CLKOUT5[2], S1_CLKOUT5[3], S1_CLKOUT5[0], S1_CLKOUT5[1], S1_CLKOUT5[18], //bits 15 downto 11
S1_CLKOUT5[19], S1_CLKOUT5[17], S1_CLKOUT5[16], S1_CLKOUT5[15], S1_CLKOUT0[3], //bits 10 downto 6
S1_CLKOUT0[0], S1_CLKOUT0[2], 1'b0, S1_CLKOUT4[11], S1_CLKOUT4[9], S1_CLKOUT4[10]}; //bits 5 downto 0
rom[9] = {5'h0E, 16'h00D0, S1_CLKOUT5[10], S1_CLKOUT5[11], S1_CLKOUT5[8], S1_CLKOUT5[9], S1_CLKOUT5[6], //bits 15 downto 11
S1_CLKOUT5[7], S1_CLKOUT5[20], S1_CLKOUT5[13], 2'b00, S1_CLKOUT5[22], 1'b0, //bits 10 downto 4
S1_CLKOUT5[5], S1_CLKOUT5[21], S1_CLKOUT5[12], S1_CLKOUT5[4]}; //bits 3 downto 0
rom[10] = {5'h0F, 16'h0003, S1_CLKFBOUT[4], S1_CLKFBOUT[5], S1_CLKFBOUT[3], S1_CLKFBOUT[12], S1_CLKFBOUT[1], //bits 15 downto 11
S1_CLKFBOUT[2], S1_CLKFBOUT[0], S1_CLKFBOUT[19], S1_CLKFBOUT[18], S1_CLKFBOUT[17], //bits 10 downto 6
S1_CLKFBOUT[15], S1_CLKFBOUT[16], S1_CLKOUT0[12], S1_CLKOUT0[1], 2'b00}; //bits 5 downto 0
rom[11] = {5'h10, 16'h800C, 1'b0, S1_CLKOUT0[9], S1_CLKOUT0[11], S1_CLKOUT0[10], S1_CLKFBOUT[10], S1_CLKFBOUT[11], //bits 15 downto 10
S1_CLKFBOUT[9], S1_CLKFBOUT[8], S1_CLKFBOUT[7], S1_CLKFBOUT[6], S1_CLKFBOUT[13], //bits 9 downto 5
S1_CLKFBOUT[20], 2'b00, S1_CLKFBOUT[21], S1_CLKFBOUT[22]}; //bits 4 downto 0
rom[12] = {5'h11, 16'hFC00, 6'h00, S1_CLKOUT3[3], S1_CLKOUT3[16], S1_CLKOUT2[11], S1_CLKOUT2[1], S1_CLKOUT1[18], //bits 15 downto 6
S1_CLKOUT1[0], S1_CLKOUT0[6], S1_CLKOUT0[20], S1_CLKOUT0[8], S1_CLKOUT0[7]}; //bits 5 downto 0
rom[13] = {5'h12, 16'hF0FF, 4'h0, S1_CLKOUT5[14], S1_CLKFBOUT[14], S1_CLKOUT4[0], S1_CLKOUT4[18], 8'h00}; //bits 15 downto 0
rom[14] = {5'h13, 16'h5120, S1_DIVCLK[11], 1'b0, S1_DIVCLK[10], 1'b0, S1_DIVCLK[7], S1_DIVCLK[8], //bits 15 downto 10
S1_DIVCLK[0], 1'b0, S1_DIVCLK[5], S1_DIVCLK[2], 1'b0, S1_DIVCLK[13], 4'h0}; //bits 9 downto 0
rom[15] = {5'h14, 16'h2FFF, S1_LOCK[1], S1_LOCK[2], 1'b0, S1_LOCK[0], 12'h000}; //bits 15 downto 0
rom[16] = {5'h15, 16'hBFF4, 1'b0, S1_DIVCLK[12], 10'h000, S1_LOCK[38], 1'b0, S1_LOCK[32], S1_LOCK[39]}; //bits 15 downto 0
rom[17] = {5'h16, 16'h0A55, S1_LOCK[15], S1_LOCK[13], S1_LOCK[27], S1_LOCK[16], 1'b0, S1_LOCK[10], //bits 15 downto 10
1'b0, S1_DIVCLK[9], S1_DIVCLK[1], 1'b0, S1_DIVCLK[6], 1'b0, S1_DIVCLK[3], //bits 9 downto 3
1'b0, S1_DIVCLK[4], 1'b0}; //bits 2 downto 0
rom[18] = {5'h17, 16'hFFD0, 10'h000, S1_LOCK[17], 1'b0, S1_LOCK[8], S1_LOCK[9], S1_LOCK[23], S1_LOCK[22]}; //bits 15 downto 0
rom[19] = {5'h18, 16'h1039, S1_DIGITAL_FILT[6], S1_DIGITAL_FILT[7], S1_DIGITAL_FILT[0], 1'b0, //bits 15 downto 12
S1_DIGITAL_FILT[2], S1_DIGITAL_FILT[1], S1_DIGITAL_FILT[3], S1_DIGITAL_FILT[9], //bits 11 downto 8
S1_DIGITAL_FILT[8], S1_LOCK[26], 3'h0, S1_LOCK[19], S1_LOCK[18], 1'b0}; //bits 7 downto 0
rom[20] = {5'h19, 16'h0000, S1_LOCK[24], S1_LOCK[25], S1_LOCK[21], S1_LOCK[14], S1_LOCK[11], //bits 15 downto 11
S1_LOCK[12], S1_LOCK[20], S1_LOCK[6], S1_LOCK[35], S1_LOCK[36], //bits 10 downto 6
S1_LOCK[37], S1_LOCK[3], S1_LOCK[33], S1_LOCK[31], S1_LOCK[34], S1_LOCK[30]}; //bits 5 downto 0
rom[21] = {5'h1A, 16'hFFFC, 14'h0000, S1_LOCK[28], S1_LOCK[29]}; //bits 15 downto 0
rom[22] = {5'h1D, 16'h2FFF, S1_LOCK[7], S1_LOCK[4], 1'b0, S1_LOCK[5], 12'h000}; //bits 15 downto 0
//***********************************************************************
// State 2 Initialization
//***********************************************************************
rom[23] = {5'h05, 16'h50FF, S2_CLKOUT0[19], 1'b0, S2_CLKOUT0[18], 1'b0,//bits 15 down to 12
S2_CLKOUT0[16], S2_CLKOUT0[17], S2_CLKOUT0[15], S2_CLKOUT0[14], 8'h00};//bits 11 downto 0
rom[24] = {5'h06, 16'h010B, S2_CLKOUT1[4], S2_CLKOUT1[5], S2_CLKOUT1[3], S2_CLKOUT1[12], //bits 15 down to 12
S2_CLKOUT1[1], S2_CLKOUT1[2], S2_CLKOUT1[19], 1'b0, S2_CLKOUT1[17], S2_CLKOUT1[16], //bits 11 down to 6
S2_CLKOUT1[14], S2_CLKOUT1[15], 1'b0, S2_CLKOUT0[13], 2'h0}; //bits 5 down to 0
rom[25] = {5'h07, 16'hE02C, 3'h0, S2_CLKOUT1[11], S2_CLKOUT1[9], S2_CLKOUT1[10], //bits 15 down to 10
S2_CLKOUT1[8], S2_CLKOUT1[7], S2_CLKOUT1[6], S2_CLKOUT1[20], 1'b0, S2_CLKOUT1[13], //bits 9 down to 4
2'b00, S2_CLKOUT1[21], S2_CLKOUT1[22]}; //bits 3 down to 0
rom[26] = {5'h08, 16'h4001, S2_CLKOUT2[22], 1'b0, S2_CLKOUT2[5], S2_CLKOUT2[21], //bits 15 downto 12
S2_CLKOUT2[12], S2_CLKOUT2[4], S2_CLKOUT2[3], S2_CLKOUT2[2], S2_CLKOUT2[0], S2_CLKOUT2[19], //bits 11 down to 6
S2_CLKOUT2[17], S2_CLKOUT2[18], S2_CLKOUT2[15], S2_CLKOUT2[16], S2_CLKOUT2[14], 1'b0}; //bits 5 down to 0
rom[27] = {5'h09, 16'h0D03, S2_CLKOUT3[14], S2_CLKOUT3[15], S2_CLKOUT0[21], S2_CLKOUT0[22], 2'h0, S2_CLKOUT2[10], 1'b0, //bits 15 downto 8
S2_CLKOUT2[9], S2_CLKOUT2[8], S2_CLKOUT2[6], S2_CLKOUT2[7], S2_CLKOUT2[13], S2_CLKOUT2[20], 2'h0}; //bits 7 downto 0
rom[28] = {5'h0A, 16'hB001, 1'b0, S2_CLKOUT3[13], 2'h0, S2_CLKOUT3[21], S2_CLKOUT3[22], S2_CLKOUT3[5], S2_CLKOUT3[4], //bits 15 downto 8
S2_CLKOUT3[12], S2_CLKOUT3[2], S2_CLKOUT3[0], S2_CLKOUT3[1], S2_CLKOUT3[18], S2_CLKOUT3[19], //bits 7 downto 2
S2_CLKOUT3[17], 1'b0}; //bits 1 downto 0
rom[29] = {5'h0B, 16'h0110, S2_CLKOUT0[5], S2_CLKOUT4[19], S2_CLKOUT4[14], S2_CLKOUT4[17], //bits 15 downto 12
S2_CLKOUT4[15], S2_CLKOUT4[16], S2_CLKOUT0[4], 1'b0, S2_CLKOUT3[11], S2_CLKOUT3[10], //bits 11 downto 6
S2_CLKOUT3[9], 1'b0, S2_CLKOUT3[7], S2_CLKOUT3[8], S2_CLKOUT3[20], S2_CLKOUT3[6]}; //bits 5 downto 0
rom[30] = {5'h0C, 16'h0B00, S2_CLKOUT4[7], S2_CLKOUT4[8], S2_CLKOUT4[20], S2_CLKOUT4[6], 1'b0, S2_CLKOUT4[13], //bits 15 downto 10
2'h0, S2_CLKOUT4[22], S2_CLKOUT4[21], S2_CLKOUT4[4], S2_CLKOUT4[5], S2_CLKOUT4[3], //bits 9 downto 3
S2_CLKOUT4[12], S2_CLKOUT4[1], S2_CLKOUT4[2]}; //bits 2 downto 0
rom[31] = {5'h0D, 16'h0008, S2_CLKOUT5[2], S2_CLKOUT5[3], S2_CLKOUT5[0], S2_CLKOUT5[1], S2_CLKOUT5[18], //bits 15 downto 11
S2_CLKOUT5[19], S2_CLKOUT5[17], S2_CLKOUT5[16], S2_CLKOUT5[15], S2_CLKOUT0[3], //bits 10 downto 6
S2_CLKOUT0[0], S2_CLKOUT0[2], 1'b0, S2_CLKOUT4[11], S2_CLKOUT4[9], S2_CLKOUT4[10]}; //bits 5 downto 0
rom[32] = {5'h0E, 16'h00D0, S2_CLKOUT5[10], S2_CLKOUT5[11], S2_CLKOUT5[8], S2_CLKOUT5[9], S2_CLKOUT5[6], //bits 15 downto 11
S2_CLKOUT5[7], S2_CLKOUT5[20], S2_CLKOUT5[13], 2'h0, S2_CLKOUT5[22], 1'b0, //bits 10 downto 4
S2_CLKOUT5[5], S2_CLKOUT5[21], S2_CLKOUT5[12], S2_CLKOUT5[4]}; //bits 3 downto 0
rom[33] = {5'h0F, 16'h0003, S2_CLKFBOUT[4], S2_CLKFBOUT[5], S2_CLKFBOUT[3], S2_CLKFBOUT[12], S2_CLKFBOUT[1], //bits 15 downto 11
S2_CLKFBOUT[2], S2_CLKFBOUT[0], S2_CLKFBOUT[19], S2_CLKFBOUT[18], S2_CLKFBOUT[17], //bits 10 downto 6
S2_CLKFBOUT[15], S2_CLKFBOUT[16], S2_CLKOUT0[12], S2_CLKOUT0[1], 2'b00}; //bits 5 downto 0
rom[34] = {5'h10, 16'h800C, 1'b0, S2_CLKOUT0[9], S2_CLKOUT0[11], S2_CLKOUT0[10], S2_CLKFBOUT[10], S2_CLKFBOUT[11], //bits 15 downto 10
S2_CLKFBOUT[9], S2_CLKFBOUT[8], S2_CLKFBOUT[7], S2_CLKFBOUT[6], S2_CLKFBOUT[13], //bits 9 downto 5
S2_CLKFBOUT[20], 2'h0, S2_CLKFBOUT[21], S2_CLKFBOUT[22]}; //bits 4 downto 0
rom[35] = {5'h11, 16'hFC00, 6'h00, S2_CLKOUT3[3], S2_CLKOUT3[16], S2_CLKOUT2[11], S2_CLKOUT2[1], S2_CLKOUT1[18], //bits 15 downto 6
S2_CLKOUT1[0], S2_CLKOUT0[6], S2_CLKOUT0[20], S2_CLKOUT0[8], S2_CLKOUT0[7]}; //bits 5 downto 0
rom[36] = {5'h12, 16'hF0FF, 4'h0, S2_CLKOUT5[14], S2_CLKFBOUT[14], S2_CLKOUT4[0], S2_CLKOUT4[18], 8'h00}; //bits 15 downto 0
rom[37] = {5'h13, 16'h5120, S2_DIVCLK[11], 1'b0, S2_DIVCLK[10], 1'b0, S2_DIVCLK[7], S2_DIVCLK[8], //bits 15 downto 10
S2_DIVCLK[0], 1'b0, S2_DIVCLK[5], S2_DIVCLK[2], 1'b0, S2_DIVCLK[13], 4'h0}; //bits 9 downto 0
rom[38] = {5'h14, 16'h2FFF, S2_LOCK[1], S2_LOCK[2], 1'b0, S2_LOCK[0], 12'h000}; //bits 15 downto 0
rom[39] = {5'h15, 16'hBFF4, 1'b0, S2_DIVCLK[12], 10'h000, S2_LOCK[38], 1'b0, S2_LOCK[32], S2_LOCK[39]}; //bits 15 downto 0
rom[40] = {5'h16, 16'h0A55, S2_LOCK[15], S2_LOCK[13], S2_LOCK[27], S2_LOCK[16], 1'b0, S2_LOCK[10], //bits 15 downto 10
1'b0, S2_DIVCLK[9], S2_DIVCLK[1], 1'b0, S2_DIVCLK[6], 1'b0, S2_DIVCLK[3], //bits 9 downto 3
1'b0, S2_DIVCLK[4], 1'b0}; //bits 2 downto 0
rom[41] = {5'h17, 16'hFFD0, 10'h000, S2_LOCK[17], 1'b0, S2_LOCK[8], S2_LOCK[9], S2_LOCK[23], S2_LOCK[22]}; //bits 15 downto 0
rom[42] = {5'h18, 16'h1039, S2_DIGITAL_FILT[6], S2_DIGITAL_FILT[7], S2_DIGITAL_FILT[0], 1'b0, //bits 15 downto 12
S2_DIGITAL_FILT[2], S2_DIGITAL_FILT[1], S2_DIGITAL_FILT[3], S2_DIGITAL_FILT[9], //bits 11 downto 8
S2_DIGITAL_FILT[8], S2_LOCK[26], 3'h0, S2_LOCK[19], S2_LOCK[18], 1'b0}; //bits 7 downto 0
rom[43] = {5'h19, 16'h0000, S2_LOCK[24], S2_LOCK[25], S2_LOCK[21], S2_LOCK[14], S2_LOCK[11], //bits 15 downto 11
S2_LOCK[12], S2_LOCK[20], S2_LOCK[6], S2_LOCK[35], S2_LOCK[36], //bits 10 downto 6
S2_LOCK[37], S2_LOCK[3], S2_LOCK[33], S2_LOCK[31], S2_LOCK[34], S2_LOCK[30]}; //bits 5 downto 0
rom[44] = {5'h1A, 16'hFFFC, 14'h0000, S2_LOCK[28], S2_LOCK[29]}; //bits 15 downto 0
rom[45] = {5'h1D, 16'h2FFF, S2_LOCK[7], S2_LOCK[4], 1'b0, S2_LOCK[5], 12'h000}; //bits 15 downto 0
// Initialize the rest of the ROM
for(ii = 46; ii < 64; ii = ii +1) begin
rom[ii] = 0;
end
end
// Output the initialized rom value based on rom_addr each clock cycle
always @(posedge SCLK) begin
rom_do<= rom[rom_addr];
end
//**************************************************************************
// Everything below is associated whith the state machine that is used to
// Read/Modify/Write to the PLL.
//**************************************************************************
// State sync
reg [3:0] current_state = RESTART;
reg [3:0] next_state = RESTART;
// State Definitions
localparam RESTART = 4'h1;
localparam WAIT_LOCK = 4'h2;
localparam WAIT_SEN = 4'h3;
localparam ADDRESS = 4'h4;
localparam WAIT_A_DRDY = 4'h5;
localparam BITMASK = 4'h6;
localparam BITSET = 4'h7;
localparam WRITE = 4'h8;
localparam WAIT_DRDY = 4'h9;
// These variables are used to keep track of the number of iterations that
// each state takes to reconfigure
// STATE_COUNT_CONST is used to reset the counters and should match the
// number of registers necessary to reconfigure each state.
localparam STATE_COUNT_CONST = 23;
reg [4:0] state_count = STATE_COUNT_CONST;
reg [4:0] next_state_count = STATE_COUNT_CONST;
// This block assigns the next register value from the state machine below
always @(posedge SCLK) begin
DADDR <= next_daddr;
DWE <= next_dwe;
DEN <= next_den;
RST_PLL <= next_rst_pll;
DI <= next_di;
SRDY <= next_srdy;
rom_addr <= next_rom_addr;
state_count <= next_state_count;
end
// This block assigns the next state, reset is syncronous.
always @(posedge SCLK) begin
if(!RST) begin
current_state <= RESTART;
end else begin
current_state <= next_state;
end
end
always @* begin
// Setup the default values
next_srdy = 1'b0;
next_daddr = DADDR;
next_dwe = 1'b0;
next_den = 1'b0;
next_rst_pll = RST_PLL;
next_di = DI;
next_rom_addr = rom_addr;
next_state_count = state_count;
case (current_state)
// If RST is asserted reset the machine
RESTART: begin
next_daddr = 5'h00;
next_di = 16'h0000;
next_rom_addr = 6'h00;
next_rst_pll = 1'b1;
next_state = WAIT_LOCK;
end
// Waits for the PLL to assert LOCKED - once it does asserts SRDY
WAIT_LOCK: begin
// Make sure reset is de-asserted
next_rst_pll = 1'b0;
// Reset the number of registers left to write for the next
// reconfiguration event.
next_state_count = STATE_COUNT_CONST;
if(LOCKED) begin
// PLL is locked, go on to wait for the SEN signal
next_state = WAIT_SEN;
// Assert SRDY to indicate that the reconfiguration module is
// ready
next_srdy = 1'b1;
end else begin
// Keep waiting, locked has not asserted yet
next_state = WAIT_LOCK;
end
end
// Wait for the next SEN pulse and set the ROM addr appropriately
// based on SADDR
WAIT_SEN: begin
if(SEN) begin
// SEN was asserted
if(!SADDR) begin
// Reconfigure with the first (0) state
next_rom_addr = 8'h00;
end else begin
// Reconfigure with the second (1) state
next_rom_addr = STATE_COUNT_CONST;
end
// Go on to address the PLL
next_state = ADDRESS;
end else begin
// Keep waiting for SEN to be asserted
next_state = WAIT_SEN;
end
end
// Set the address on the PLL and assert DEN to read the value
ADDRESS: begin
// Reset the DCM through the reconfiguration
next_rst_pll = 1'b1;
// Enable a read from the PLL and set the PLL address
next_den = 1'b1;
next_daddr = rom_do[36:32];
// Wait for the data to be ready
next_state = WAIT_A_DRDY;
end
// Wait for DRDY to assert after addressing the PLL
WAIT_A_DRDY: begin
if(DRDY) begin
// Data is ready, mask out the bits to save
next_state = BITMASK;
end else begin
// Keep waiting till data is ready
next_state = WAIT_A_DRDY;
end
end
// Zero out the bits that are not set in the mask stored in rom
BITMASK: begin
// Do the mask
next_di = rom_do[31:16] & DO;
// Go on to set the bits
next_state = BITSET;
end
// After the input is masked, OR the bits with calculated value in rom
BITSET: begin
// Set the bits that need to be assigned
next_di = rom_do[15:0] | DI;
// Set the next address to read from ROM
next_rom_addr = rom_addr + 1'b1;
// Go on to write the data to the PLL
next_state = WRITE;
end
// DI is setup so assert DWE, DEN, and RST_PLL. Subtract one from the
// state count and go to wait for DRDY.
WRITE: begin
// Set WE and EN on PLL
next_dwe = 1'b1;
next_den = 1'b1;
// Decrement the number of registers left to write
next_state_count = state_count - 1'b1;
// Wait for the write to complete
next_state = WAIT_DRDY;
end
// Wait for DRDY to assert from the PLL. If the state count is not 0
// jump to ADDRESS (continue reconfiguration). If state count is
// 0 wait for lock.
WAIT_DRDY: begin
if(DRDY) begin
// Write is complete
if(state_count > 0) begin
// If there are more registers to write keep going
next_state = ADDRESS;
end else begin
// There are no more registers to write so wait for the PLL
// to lock
next_state = WAIT_LOCK;
end
end else begin
// Keep waiting for write to complete
next_state = WAIT_DRDY;
end
end
// If in an unknown state reset the machine
default: begin
next_state = RESTART;
end
endcase
end
endmodule |
|
/2 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2012-12-27 21:52:56
发表于 2012-12-28 11:56:30
楼主