Optimizing Power-Save-Mode Performance in buck converter

Tryagain702 · 发表于 2012-2-14 10:58:07

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

Topic_5_Matzberger_Vaucourt (2).pdf (1.49 MB, 下载次数: 92 ) A paper introduce some ways which is used to Optimizing Power-Save-Mode Performance in Low-Power Synchronous Buck Converters in TI (Texas Instruments).

Brief:
Buck converters have become common place in a variety of applications where size and efficiency are
primary considerations. While basic converters operate with fixed-frequency, pulse-width modulation
(PWM), many low-power applications can benefit from the performance improvements of variablefrequency
or pulse-frequency modulation (PFM). This topic covers the operational differences between
PWM and PFM architectures, with detailed discussion about key parameters such as output ripple
voltage, quiescent current, and load-transient response. Also covered are PFM topologies that use single
threshold, dual threshold

sgdyjsl · 发表于 2013-6-4 18:20:48

RE: Optimizing Power-Save-Mode Performance in buck converter [修改]

ralphtwtw · 发表于 2016-3-19 10:49:35

Optimizing Power-Save-Mode Performance in buck converter

Jason_ke · 发表于 2018-5-4 19:12:41

謝謝分享..好東西.

[原创] Optimizing Power-Save-Mode Performance in buck converter

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

站长推荐 /1