Calibre XRC反提出来的网表，有问题啊，来人救命啊

茶俊

做完版图后，使用calibre反提网表，网表顺利得到了，不过自己在看网表的时候，发现里面不少管子的名字重了，不解啊，仿真的时候也报错，大家帮我看看啊！（网表如下，按颜色分）

m__21 N_XI9/net097___21_d N_ID2S___21_g N_VDDA___21_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__22 N_XI9/net097___22_d N_ID2S___22_g N_VDDA___22_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__21 N_XI9/net71___21_d N_ID2S___21_g N_VDDA___21_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__22 N_XI9/net71___22_d N_ID2S___22_g N_VDDA___22_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__23 N_XI9/net71___23_d N_ID2S___23_g N_VDDA___23_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048

m__24 N_XI9/net71___24_d N_ID2S___24_g N_VDDA___24_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__23 N_XI9/net097___23_d N_ID2S___23_g N_VDDA___23_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048
m__24 N_XI9/net097___24_d N_ID2S___24_g N_VDDA___24_s N_VDDA_XI9/MM32_b pch3
+ L=4e-07 W=1e-05 AD=4.8e-12 AS=4.8e-12 PD=2.096e-05 PS=2.096e-05 NRD=0.048
+ NRS=0.048

gayve

是不是有些网表文件要经过修改才能用的呢？

111qqq

could you provide the command file ?that is easy to see where the problem is.

sh_0119

确实要从你的rule file入手才能解决问题。

semico_ljj

可能是自己错了。。。

小桂子

应先看看Rule有没有问题，实在没办法就改网表吧

dilyyao

路过    看看