metal 1 的宽度为0？

damonzhao · 发表于 2012-3-2 11:22:30

回复 10# xinu2009

Sroute的时候就用到呀

xinu2009 · 发表于 2012-3-2 12:33:27

回复 11# damonzhao

老兄我加你下MSN

xinu2009 · 发表于 2012-3-5 14:19:28

问题没有解决继续求解

ayuan1027 · 发表于 2012-3-5 16:13:20

同关注！

longjilb · 发表于 2012-12-6 17:14:57

版主，这个问题最后的原因是什么啊

729050850 · 发表于 2012-12-6 19:52:21

在关注这个问题，后来咋解决了？

522526tl · 发表于 2014-11-21 13:03:06

回复 13# xinu2009
问下版主这个问题解决了吗我也遇到这样的 warnings啦

522526tl · 发表于 2014-11-21 13:04:41

回复 9# damonzhao
版主，我的也遇到了同样问题，lef读入没问题，log部分如下：#Start globalDetailRoute on Fri Nov 21 12:37:24 2014
#
#Generating timing graph information, please wait...
#72096 total nets, 241 already routed, 241 will ignore in trialRoute
#Option routeTdrEffort has been set to 3 by user
#Dump tif for version 2.1
#Write timing file took: cpu time = 00:00:11, elapsed time = 00:00:11, memory = 477.00 (Mb)
#Done generating timing graph information.
#Start reading timing information from file .timing_file.tif ...
#
#The worst setup slack read in is 0.202
#
#No hold time constraints read in
#Read in timing information for 61 ports, 71940 instances from timing file .timing_file.tif.
#NanoRoute Version v08.10-p008 NR081027-0018/USR58-UB
#WARNING (NREX-28) The height of the first routing layer M1 is 0.000000. It should be larger than 0.000000
#WARNING (NREX-30) Please also check the height and metal thickness values for the routing layers heigher than routing layer M1
#WARNING (NREX-4) No Extended Cap Table was imported. Not enough process information was provided either and default Extended Cap Table database will be used.
#Merging special wires...

请版主指导一二啊

damonzhao · 发表于 2014-11-21 15:44:55

回复 18# 522526tl

然后就不能跑了？

522526tl · 发表于 2014-11-21 15:47:02

回复 19# damonzhao
能跑，跑完后 0个fails 但是有好多warnings

[求助] metal 1 的宽度为0？

站长推荐 /2