求教：新版encounter 10.10在输入设计时如何输入时序库文件？

禅师1988

找了半天没找到输入时序库文件（.lib或.tlf）的地方，显示以下warning，不知道是否和没有时序库有关。
**WARN: (ENCSYC-2):    Timing is not defined for cell Y57B.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y565.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y564.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y522.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y521.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y517.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y512.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y511.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y454.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y438NF.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y438.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y437NE.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y435NE.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y435.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y434NC.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y433NG.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y432NH.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y432ND.
**WARN: (ENCSYC-2):    Timing is not defined for cell Y432NA.

陈涛

仔细看menu

zq2164

I have the question too.

wuzumakinaluduo

回复 1# 禅师1988 请问一下，这个问题解决了吗？我已经添加过了.lib文件，但是还是出现这个warning ,在布局布线图形中没有标准单元那部分的粉红色区域，