2011.11 JSSC bandgap reference

huangfei888 · 发表于 2011-12-6 19:30:48

谢谢楼主分享。。。

Jason_ke · 发表于 2012-2-7 10:13:50

Good paper, thanks very much!

fhchen2002 · 发表于 2012-2-7 13:17:29

Abstract：

A CMOS bandgap reference with an inaccuracy of ±0.15% (3 σ) from -40°C to 125°C ...
princesunny 发表于 2011-12-1 10:20

登录/注册后可看大图

Title of the paper:
A Single-Trim CMOS Bandgap Reference With a 3σ Inaccuracy of 0.15% From 40°C to 125°C

Author: Guang Ge, Cheng Zhang, Gian Hoogzaad, and Kofi A. A. Makinwa, Fellow, IEEE

Guang Gewas born in Wuhan, China, on March 31, 1985. He received the B.Sc. degree in electrical engineering
from the University of Science and Technology of China, China, in 2007, and the M.Sc. degree (cum laude) in electrical engineering from Delft University of Technology, The Netherlands, in 2009. From 2008 to 2009 he was an integrated circuit
(IC) design trainee in NXP Semiconductors, The Netherlands, designing high precision voltage references and low-offset operational amplifiers. Since 2009 he has been an IC design engineer in NXP Semiconductors, The Netherlands, where he works on the definition and development of switching mode power supply (SMPS) control IC products. His professional interests include the design and application of high efficiency power management and high precision electronic instrumentation systems.

Cheng Zhang received the B.Sc. degree in electrical engineering from Huazhong University of Science
and Technology, Wuhan, China, in 2003, and the M.Sc. degree in electrical engineering (cum laude)
from Delft University of Technology, Delft, The Netherlands, in 2006.
From 2005 to 2006, he worked on high precision temperature sensors in Delft University of Technology.
In 2007, he joined NXP Semiconductors, The Netherlands, as an IC design engineer, working on high precision circuits (low-offset amplifiers, bandgaps, and phase detectors) for LED backlighting. From 2008, as a Lead Designer, he is working on AC-DC converters for laptop adapters, PC power supply, and mobile phone chargers. His current research interests include the
design of high performance power converters, high precision analog circuits, and sensor interface. His research has resulted in three U.S. patents and some technical papers.