tran仿真在ADE L里可以跑，在ADE XL里就出错

ZHZIC

打算在ADE XL里跑个蒙特卡洛，需要跑tran仿真但是在ADE XL里跑tran仿真就会报错如下：
Error found by spectre during circuit read-in.
    ERROR (SFE-874): "input.scs" 23191: Cannot run the simulation because syntax error `Unexpected close square bracket "]"' was encountered at line 23191, column 38. Correct the syntax error and rerun the simulation.
    ERROR (SFE-841): "input.scs" 23192: Cannot run the simulation because an unexpected character '[' was found at line 23192 in the netlist. Correct the syntax error and rerun the simulation.
    ERROR (SFE-841): "input.scs" 23192: Cannot run the simulation because an unexpected character '[' was found at line 23192 in the netlist. Correct the syntax error and rerun the simulation.
    ERROR (SFE-841): "input.scs" 23192: Cannot run the simulation because an unexpected character '[' was found at line 23192 in the netlist. Correct the syntax error and rerun the simulation.

定位到23191和23192行，可以发现：
writefinal="spectre.fc" savetime=[] annotate=status infotime_pair=no \
    infotimes=[] actime_pair=no actimes=[] acnames=[] maxiters=5 \

也看不出是什么意思啊
但是我在ADE L里跑tran仿真是没有问题的，有人知道这个问题怎么解决吗？

AnalogICrookie

楼主解决了么，我也遇到这个问题

m8510a

遇到同样的问题，不识别"<"和"["