Switch-Mode Power Converters - K. Wu (Elsevier, 2006)

semico_ljj

希望LZ下次把这些贴出来！

semico_ljj

方便来者！

semico_ljj

About the authors
Simone Buso graduated in electronic engineering at the University of
Padova in 1992. He received the Ph.D. degree in industrial electronics
and informatics from the same university in 1997. Since 1993, he
has been cooperating with the power electronics research group of the
University of Padova. Currently he is a member of the staff of Department
of Information Engineering (DEI) of the University of Padova,
where he is holding the position of associate professor. His main research
interests are in the industrial and power electronics fields and
are specifically related to dc/dc and ac/dc converters, smart power integrated
circuits, digital control and robust control of power converters, solid state lighting,
electromagnetic compatibility applied to integrated circuits, and switch mode power supplies.
Simone Buso is a member of the IEEE.
Paolo Mattavelli graduated (with honors) and received the Ph.D.
degree, both in electrical engineering, from the University of Padova
(Italy) in 1992 and in 1995, respectively. From 1995 to 2001, he
was a researcher at the University of Padova. In 2001 he joined the
Department of Electrical, Mechanical and Management Engineering
(DIEGM) of the University of Udine, where he was an associate
professor of Electronics from 2002 to 2005. From 2001 to 2005 he
was leading the Power Electronics Laboratory of the DIEGM at the University of Udine,
which he founded in 2001. Since 2005 he has been with the Department of Technology and
Management of Industrial System at the University of Padova in Vicenza. He was also Visiting
Researcher at the Massachusetts Institute of Technology in 1995 and in 1997.
His major fields of interest include analysis, modeling, and control of power converters,
digital control techniques for power electronic circuits, active power filters and power quality
issues.
Paolo Mattavelli is a member of IEEE Power Electronics, IEEE Industry Applications,
IEEE Industrial Electronics Societies, and the Italian Association of Electrical and Electronic
Engineers (AEI). He currently (2006) serves as an associate editor for IEEE Transactions on
Power Electronics, IPCC (Industrial Power Converter Committee) Review Chairman for the
IEEE Transactions on Industry Applications, and Member-at-Large of PELS Adcom.

semico_ljj

Conclusions
This book has been conceived to give to the reader a basic and introductory knowledge of some
typical power converter control problems and of their digital solutions. Although the presented
material has been focused on a single converter topology, i.e., the half-bridge voltage source
inverter, the control topics we have been dealing with represent, in our opinion, a significant
spectrum of the more frequently encountered digital control applications in power electronics.

semico_ljj

Moving from the pulse width modulation modeling, we have described the fundamental
types of digital current control loop implementation, i.e., the PI controller and the predictive
controller. These basic techniques have subsequently allowed us to present the fundamental
issues related to three phase current control, with particular consideration for the concepts of
rotating reference frame and the controllers that can be based on it.

semico_ljj

In the last part of our discussion, we have approached some more advanced control organizations, essentially based on multiloop strategies.We have consequently presented the typical case of the voltage controller for a single-phase uninterruptible power supply.We have seen how both large bandwidth and narrow bandwidth control strategies can be digitally implemented, and analyzed their merits and limitations. In addition, we have seen how the controllers we have analyzed can allow the implementation of other applications of voltage source inverters, like the controlled rectifier of the active power filter.

semico_ljj

Of course, we are aware that a lot of other extremely interesting applications could have
been dealt with, and also that the more advanced research topics could have been taken into
account and presented.We hope the choice we have made, for the sake of conciseness, and the
method we have chosen to present the selected material, starting from the very basic issues,
will be good enough to give to the readers that we have not been able to completely satisfy the
motivation for further autonomous study.
On the other hand, we hope that what has been presented will allow inexperienced readers
to successfully experiment with digital control techniques in power electronics.

charlie11

xfchen

hao shu a

zhanweisu27

very good,,,thanks