emx 5.7，modelgen 2.2 和谐更新

victore · 发表于 2022-12-27 11:54:15

感谢分享！

freecjc · 发表于 2022-12-28 13:39:59

感謝分享..!!!

THKTHK · 发表于 2023-1-3 17:20:35

本帖最后由 THKTHK 于 2023-1-5 09:16 编辑

thanks

zhangkailun0810 · 发表于 2023-1-3 17:37:16

谢谢

stevenwang168 · 发表于 2023-1-15 10:50:10

感谢分享

Rainleo · 发表于 2023-1-21 12:08:41

多谢楼主分享

Monking. · 发表于 2023-1-25 19:50:22

111111

ovicovic · 发表于 2023-1-28 17:20:53

看看好不好用

xuebi · 发表于 2023-2-7 14:41:59

谢谢，急需这个

xuebi · 发表于 2023-2-8 11:04:42

modelgen
FlexNet license location: /mnt/***************/modelgen64-2.22/license.dat:/mnt/g/emx_crk/modelgen64-2.22
Iteration 1...>|
err 1.540114e-01
Iteration 2...>|
err 1.225040e-02
Iteration 3...>|
Iteration 4...>|
Iteration 5...>|
Iteration 6...>|
ModelGen finished

Default FlexNet license set by INTSFTD_LICENSE_FILE or LM_LICENSE_FILE
FlexNet license location: /mnt/***************/modelgen64-2.22/license.dat:/mnt/***************/modelgen64-2.22
Trying FlexNet feature "IntSftModelGen"...OK
Trying FlexNet feature "IntSftContinuum"...OK

emx

Frequency 1.000000e+09:
         p1                p2
p1  3.70e-02-8.96e-02j -3.69e-02+9.01e-02j
p2 -3.69e-02+9.01e-02j  3.70e-02-8.96e-02j

Default FlexNet license set by INTSFTD_LICENSE_FILE or LM_LICENSE_FILE
FlexNet license location: /mnt/***************/emx64-5.7/license.dat:/mnt/***************/emx64-5.7
Trying FlexNet feature "IntSftEMX"...OK
Trying FlexNet feature "IntSftEMXThreading"...OK
Trying FlexNet feature "IntSftEMXPZ"...OK

请问后面这部分是什么意思啊？我要怎么运行呢？我输入emx，但是找不到command

emx 5.7，modelgen 2.2 和谐更新

站长推荐 /2