EDA patch 那些事儿~

populbb

你好，使用你的安装包和破解工具安装完以后，IC618启动不了，显示virtuoso: Command not found.
calibre2019可以正常使用，麻烦你看一下是什么原因。


[skywalker@localhost ~]$ virtuoso &
[1] 6147
[skywalker@localhost ~]$ virtuoso: Command not found.


下面是环境变量的设置。

setenv CADHOME opt/EDA/cadence
setenv LANG C
setenv CDS_Netlisting_Mode Analog
#setenv CDS_LOAD_ENV CWD
setenv CDS_LOAD_ENV CSF
setenv CDS ${CADHOME}/IC618
setenv CDSDIR ${CDS}
setenv CDSHOME ${CDS}
setenv CADENCE_DIR ${CDS}
setenv CDS_INST_DIR ${CDS}
setenv CDS_ROOT ${CDS}
setenv CDSROOT ${CDS}
setenv PATH ${PATH}{CDSDIR}/tools/dfII/bin{CDSDIR}/tools/plot/bin
setenv CDS_LIC_FILE ${CADHOME}/license/license.dat
setenv CDS_LIC_ONLY 1
setenv CDS_AUTO_64BIT ALL
setenv OA_UNSUPPORTED_PLAT linux_rhel50_gcc44x
setenv OA_HOME ${CDSDIR}/oa_v22.60.007
setenv OA_PLUGIN_PATH ${PATH}{CDSDIR}/oa_v22.60.007/data/plugins
setenv CDS_ENABLE_VMS 1
setenv W3264_NO_HOST_CHECK 1
setenv SPECTRE_HOME ${CADHOME}/SPECTRE181
setenv PATH ${PATH}:$SPECTRE_HOME/bin:\$SPECTRE_HOME/tools/binATH
setenv CDS_SPECTRE_FBENABLE 1
setenv SPECTRE_DEFAULTS -E
setenv MENTOR_HOME /opt/EDA/mentor
setenv CALIBRE_HOME ${MENTOR_HOME}/calibre2019/aoj_cal_2019.3_15.11
setenv MGC_HOME ${CALIBRE_HOME}
setenv MGLS_LICENSE_FILE ${MENTOR_HOME}/license/license.dat
setenv PATH ${PATH}:${CALIBRE_HOME}/bin
setenv MGC_LIB_PATH ${CALIBRE_HOME}/lib
setenv CALIBRE_ENABLE_SKILL_PEXBA_MODE 1
setenv MGC_CALIBRE_REALTIME_VIRTUOSO_ENABLED 1
setenv OA_PLUGIN_PATH ${CALIBRE_HOME}/shared/pkgs/icv/tools/queryskl
setenv LD_LIBRARY_PATH ${CALIBRE_HOME}/shared/pkgs/icv/tools/calibre_client/lib/64
#if ($?LD_LIBRARY_PATH) then
#  setenv LD_LIBRARY_PATH ${CALIBRE_HOME}/shared/pkgs/icv/tools/calibre_client/lib/64:${LD_LIBRARY_PATH}
#else
#  setenv LD_LIBRARY_PATH ${CALIBRE_HOME}/shared/pkgs/icv/tools/calibre_client/lib/64
#endif
setenv MGC_CALIBRE_REALTIME_VIRTUOSO_SAVE_MESSENGER_CELL 1
setenv MGC_CALIBRE_SAVE_ALL_RUNSET_VALUES 1

finelei2002

这个是linux下的工具呀

open-CAD

populbb 发表于 2019-10-13 04:47
你好，使用你的安装包和破解工具安装完以后，IC618启动不了，显示virtuoso: Command not found.[/backcolor ...

请问是你的shell是使用bash还是csh？

gubels

TTTTNNXXXX

populbb

open-CAD 发表于 2019-10-13 09:55
请问是你的shell是使用bash还是csh？

用的是csh

populbb

open-CAD 发表于 2019-10-13 09:55
请问是你的shell是使用bash还是csh？

IC618是不是没有MMSIM了，变成SPECTRE181了？

yhp2008

judung 发表于 2019-8-8 15:29
It would be perfect if Synopsys can also be patched.

[root@homeserver OCAD.0806]# ./1patch.sh /opt/eda/MMSIM1310
Start self extract...
Running....
./.ocad/selfext/onepatch.sh: 行 7:  6887 段错误               ./.ocad/selfext/sfk rep -yes -pat -bin /5589E557565381ECD00000008B5508/31C0C357565381ECD00000008B5508/ -bin /5589E557565381ECD8000000E8000000005B81C3/33C0C357565381ECD8000000E8000000005B81C3/ -bin /41574989FF415641554154554889CD534489C3/33C0C389FF415641554154554889CD534489C3/ -dir $1
Finished.
[root@homeserver OCAD.0806]#

请教版主这是什么情况引起的，redhat7.6的系统，站里能用的patch都有这情况，

populbb

open-CAD 发表于 2019-10-13 09:55
请问是你的shell是使用bash还是csh？

csh和bash我都是试过了，都是command not found

chudong

感谢楼主

dioporco

how it works ? does it generate offline license file ? Or online ?