IC618+SPECTRE18+CALIBRE2019(百度云）

open-CAD

   

linyis 发表于 2019-8-3 17:58
楼主多谢无私分享，calibre不熟悉！有没有assura617和ext617啊！如果能分享下，那就更好了！
...

http://bbs.eetop.cn/thread-866722-1-1.html

open-CAD

   

daxueliujisheng 发表于 2019-8-5 14:31
太感谢LZ 了 真的感谢  能否分享下数字设计相关的软件  比如INCISIVE INNOVUS

http://bbs.eetop.cn/thread-866722-1-1.html

open-CAD

   

maomao198477 发表于 2019-8-6 08:05
楼主能找到innovus较新的版本就更好了

http://bbs.eetop.cn/thread-866722-1-1.html

open-CAD

   

kissshenzhu 发表于 2019-8-20 21:36
都不在了，这么短的时间，搞笑的吧

爱用不用呗，帖子说了7天有效

caolixin

Reading link:  /opt/EDA/cadence/SPECTRE18.10.287/tools.lnx86/spectre/etc/ahdl/discipline.h
Reading file:  /opt/EDA/cadence/SPECTRE18.10.287/tools.lnx86/spectre/etc/ahdl/disciplines.vams
Reading link:  /opt/EDA/cadence/SPECTRE18.10.287/tools.lnx86/spectre/etc/ahdl/constants.h
Reading file:  /opt/EDA/cadence/SPECTRE18.10.287/tools.lnx86/spectre/etc/ahdl/constants.vams

Error found by spectre during AHDL read-in.
    ERROR (VACOMP-2353): "Internal (bsource)", near line 508: GCC version mismatch found. The GCC installation is either corrupted or has been modified. To solve the issue, either use the GCC version that came packaged with the release, or reinstall the release.


PS:  CENTOS7.6    GCC update to  6.3.0  

read_ljr

谢谢楼主分享

cddl

这个必须赞

wangjin0215

看看，谢谢。。。

yuany

先试试．感谢ＬＺ

rogersfo

顶