[新人求助] 数模混纺时出现错误

bbvrymx · 发表于 2018-10-31 17:25:55

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

本帖最后由 bbvrymx 于 2018-10-31 17:42 编辑

在进行数模混合仿真时无法调用版图网表文件。
报错如图。
麻烦大佬解答一下。谢谢！

bbvrymx · 发表于 2018-10-31 17:32:59

文件部分导出：

Warning from spectre in `pdio_3', during circuit read-in.

WARNING (SFE-2296):
      "/tools/Library/PDK/TSMC/tsmc18rf_1p6m_1ff_40k/models/spectre/rf018.scs"
      18645: The inline subckt definition `pdio_3' does not contain any
      inline components. The `inline' qualifier will therefore be ignored.

      Further occurrences of this warning will be suppressed.

Fatal error found by spectre during circuit read-in.
FATAL (SFE-867): Unable to open the file
      `analog/ICG8003M_C30N_V02_sm_layout.pex.netlist'.

Time for NDB Parsing: CPU = 260.405 ms, elapsed = 243.026 ms.

Time accumulated: CPU = 260.405 ms, elapsed = 243.026 ms.

Peak resident memory used = 30.4 Mbytes.

bbvrymx · 发表于 2018-11-2 15:24:14

无奈........................................................................

bbvrymx · 发表于 2018-11-2 15:26:54

是我问的有问题？还是描述错误？还是大佬们不屑解答这样的问题吗？两百查看 0回复哎.................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................................

[求助] [新人求助] 数模混纺时出现错误

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

站长推荐 /2