[北京]美资音视频公司-高级RF工程师，高级硬件工程师等职位

wei_mi1967

Senior RF Engineer
This expert will start to the following key responsibilities;
1. Responsible for overall design of RF validation, schematics design, PCB layout quality and guidance. (Video endpoint and desktop phones with WIFI/BT/NFC functions)

2. Act as the main interface from HW side to SLM, discuss with SLM to work out the RF module requirement then split the unit level requirement into submodule level as their requirement: i.e. the work of RF module lectotype, algorithms, identify the product specification etc.

3. Tracking the key nodes of RF technology, responsible for guiding the solution of specific problems in the project and provide modified scheme.

4. Responsible for RF index debug and validation of product engineering prototype.

Basic Qualifications
• 7+ years product development, hands-on experience in Wi-Fi, Bluetooth, NFC products in highly desired.
• In-depth knowledge of RF transceiver system
• Collaboration with internal/International teams about issues and solutions, familiar with radio compliance requirement is a plus
• Skilled with radio test related instruments such as signal generator, signal spectrum analyzer, network analyzer etc.
• Team players and self-motivated
==================================================================

Hardware Engineer

Position Summary

To carry out the hardware development task and report progress to the HW manager and R&D leader, work closely with the operation team in the task to ensure that the HW design fulfill the performance, reliability, and manufacturability in an efficient way.

Responsibilities

-       Design of digital and Analog circuit for performance, reliability, and manufacturability.

-       Work closely with PCB layout engineers on the PCB routing.

-       Work closely with mechanical engineers to deliver the complete hardware platform.

-       Hardware design verification.

-       Work closely with software engineer for prototype bring-up.

-       Work closely with the operation team on the DFx (DFM & DFT), particularly during prototype and pilot build.

Requirements

1.    B.S degree, or higher, in computer science, networking, and telecommunication discipline.

2.    A minimum of 5 years experience of hardware design, strong technical skills and knowledge in digital and analog circuit required.

3.    High speed digital board design, experience with complex cpu’s, dsp’s, and ASIC’s.

4.    Excellent knowledge of Audio/Video products.

5.    Experience in software driver under the Linux is prior.

6.    Strong skills in using hardware EDA tools, such as EDA tools from CADENCE, Mentor Graphic, etc.

请联系：

weimi@zybzbj.com，QQ：1637240341

工作地点：北京朝阳区三元桥附近


薪资范围：25W以上，面议