|  | 
 
| 
本帖最后由 krisger 于 2015-5-29 22:10 编辑
×
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册  
 工作地点:深圳
 
 上市公司招聘模拟IC和射频IC设计方向,欢迎提交简历到talent_analog@163.com,我会第一时间反馈到用人部门,谢谢。
 
 Analog and/or RF IC Design Engineer
 
 Job Description:
 (1)    Design state-of-art analog/RF integrated circuit using most advanced CMOS process for consumer electrical product;
 (2)    Evaluate circuit performance using instrument;
 (3)    Volume production support for designs.
 Qualifications:
 (1)    MSEE or PhD in Electronic Engineering, Communication Engineering, and Microwave Engineering with at least 2 years experience; excellent fresh candidate can also be considerable;
 (2)    Strong analog background in transistor level;
 (3)    At least one of follow block design experience: PA, LNA, Mixer, PLL, VCO, DCXO, Bandgap, LDO, ADC and DAC;
 (4)    Familiar with at deep-micro CMOS process such as 55nm and below;
 (5)    Experience with EDA tools for circuit simulation and layout such as Spectre, Hspice,  ADS, Goldengate;
 (6)    Proficient with EM modeling;
 (7)    Experience with high frequency equipment such as network analyzer, spectrum analyzer, high frequency signal source,logic analyzer;
 (8)    Knowledge of communication standards (Cellular, WLAN, BT etc) is highly desirable.
 (9)    Knowledge of mix signal design (familiar with VHDL, verilog, verilog-A) is a plus.
 | 
 |