[2011-11-1][Mentor][Calibre X86 X64 Doc][2011.2_16.14][原创] Calibre一贴搞定...

kingnan · 发表于 2012-10-15 22:44:21

楼主您好！
我按照你的方法安装设置后，输入calibre -gui出现如下信息，该怎么解决，求指教，我是新手！

WARNING: Calibre software tree not set, using software version at: /home/eda/calibre2011/x86_cal_2011.2_34.26
Application initialization failed: Can't find a usable init.tcl in the following directories:
/home/eda/calibre2011/pkgs/icv_comp/8.4/lib/tcl8.4 /usr/local/lib/tcl /home/eda/calibre2011/x86_cal_2011.2_34.26/pkgs/icv/lib/tcl8.4 /home/eda/calibre2011/x86_cal_2011.2_34.26/pkgs/lib/tcl8.4 /home/eda/calibre2011/x86_cal_2011.2_34.26/pkgs/icv/library /home/eda/calibre2011/x86_cal_2011.2_34.26/pkgs/library /home/eda/calibre2011/x86_cal_2011.2_34.26/pkgs/tcl8.4.9/library /home/eda/calibre2011/x86_cal_2011.2_34.26/tcl8.4.9/library /home/eda/calibre2011/pkgs/icv_comp/8.4/lib/tcl

This probably means that Tcl wasn't installed properly.

prexy · 发表于 2012-10-18 11:49:00

楼主好，请教一下，我安装32bit calibre会宝segement fault错误，使用图形化安装方式会报
Supply valid installation source to continue.
The following was encountered while reading the source media:
ERROR reading zip file!...null
是什么问题，非常感谢！！