一个很经典的关于高速、高精度比较器设计的Paper

kuxuanxinzai · 发表于 2012-10-16 17:12:47

谢谢分享。。。学习一下。。。

kuxuanxinzai · 发表于 2012-10-16 17:13:17

谢谢分享哦，学习一下。。。。。

oujian123 · 发表于 2012-10-23 17:09:30

看看。。。

chenyingping · 发表于 2012-10-24 20:03:28

回复 1# 辽大队长

kan kan

hetiandemeng017 · 发表于 2012-11-22 14:57:52

回复 1# 辽大队长
请教队长一个问题：http://bbs.21ic.com/attachments/month_1211/1211041313e7bc0fd3fa008458.jpg
这幅图中红色部分怎么理解呢？这是我在21ic论坛上发的帖子，没有人回答的出来，还请大侠指点一下啊。

http://bbs.21ic.com/icview-390709-1-1.html

MessiahSEU · 发表于 2012-11-22 18:48:02

多谢分享

kevinhj · 发表于 2012-11-29 10:47:51

十分感谢楼主分享！！！

帕帕卢卡斯 · 发表于 2013-8-28 11:56:30

回复 1# 辽大队长

KANKANKANKAN

fhchen2002 · 发表于 2013-8-28 15:37:08

A High-Speed CMOS Comparator with 8-b Resolution
G. M. Yin, F. Op’t Eynde, and W. Sansen

这张 ...
辽大队长发表于 2010-11-28 19:34

登录/注册后可看大图

不过初步测了20多片，失调分布满足高斯分布，典型值3mV，最大值6mV，可是我仿真的时候精度可以达到30uV，相差有点多，不知道是为什么？
Do not confuse 失调分布 Mismatch Distribution, or better described as "distribution of input referred offset voltage" of a comparator with "resolution." And, most likely during your SPICE simulation, the simulator would not be able to calculate the input referred noise, therefore, 30-µV resolution is under noiseless condition.

Resolution of a specific comparator is related to the comparator's input referred noise, the over-drive voltage, gain-bandwidth product, and operation frequency.

Over-drive voltage is defined as the voltage applied at delta voltage between the (+) and (-) terminals.
In general, the smaller the overdrive voltage, the longer latency for the comparator. (That is, the longer it takes for the comparator to differentiate signal between zero and one.)

Offset distribution most likely is due to the sizing of MOS transistors and layout techniques (, in case offset cancellation techniques is not deployed).

寂寞英雄 · 发表于 2013-8-28 17:26:19

学习一下！

[资料] 一个很经典的关于高速、高精度比较器设计的Paper

站长推荐 /1