Jitter and Decision-level Noise Separation in A/D Converters

angelweishan

Jitter and Decision-level Noise Separation in A/D Converters

Abstract
Gaussian aperture jitter leads to a reduced Signalto-Noise-Ratio of A/D converters. Also other noise sources, faults and nonlinearities affect the digital output signal. A measurement setup for a new offchip diagnosis method, which systematically separates the jitter-induced errors from the errors caused by these other factors, is described. Deterministic errors are removed via a subtracting technique. High-level ADC simulations and measurements have been carried out to determine relations between the size of the jitter or decisionlevel noise and the remaining random errors. By carrying out two tests at two diferent input frequencies and using the simulation results, errors induced by decision-level noise can be removed.

mtwumtwu

good reference to know more deatil of noise in ADC

chujn

下来看看，谢谢。

nool

一般了，下下看看

casrious

多谢分享。 好像没有太大的用处。

jinyexing

不错，谢谢分享！

fwutsairlin

thanks!

ralphtwtw

Jitter and Decision-level Noise Separation in A/D Converters