[分享]ppt版 IC设计经典之作：digital system clocking

pipida

版内有pdf版，这里提供原始的ppt给大家作为学习之用，毕竟ppt的要点更明确突出，对理解该书更有益处，所有ppt都是最新更新的哈。
实在对不住了老O，把你给卖了不就为了点积分嘛

pdf的下载见下面链接
http://www.eetop.cn/bbs/viewthread.php?tid=3448&extra=&highlight=Digital%2BSystem%2BClocking&page=1

和

http://www.eetop.cn/bbs/viewthread.php?tid=33033&extra=&highlight=Digital%2BSystem%2BClocking&page=1

第一章的文件有问题，在后面的跟贴里有更新，感谢小哥1900指出

该书目录如下
Chapter 1 Introduction
1.1 Clocking in Synchronous Systems
1.2 System Clock Design
1.2.1 Global System Clock Generation
1.2.2 On-Chip Clock Generation
1.2.3 Noise Sources and Loop Bandwidth
1.2.4 Design Considerations
1.3 Timing Parameters
1.3.1 Clock Skew
1.3.2 Clock Jitter
1.4 Clock Signal Distribution
1.4.1 Historical Overview
1.4.2 Clock Distribution in Modern Microprocessors
Noise Sources and Loop Bandwidth
Clock Distribution in Modern Microprocessors
Chapter 2 Theory of Clocked Storage Elements
2.1 Latch-Based Clocked Storage Elements
2.1.1 True-Single-Phase-Clock Latch
2.1.2 Pulse Register Single Latch
2.2.1 Time Window-Based Flip-Flops
2.2 Flip-Flop
Chapter 3 Timing and Energy Parameters
3.1 Timing Parameters
3.1.1 Clock-to-Output Delay, t c ~
3.1.2 Setup Time, U
3.1.3 Hold Time, H
3.1.4 Late Data Arrival and Time Borrowing
3.1.5 Early Data Arrival and Internal Race Immunity
3.1.6 Minimum Data Pulse Width
3.2.1 Components of Energy Consumption
3.2.2 Energy Breakdown
3.2.3 Energy per Transition
3.2.4 Glitching Energy
Interface with Clock Network and Combinational Logic
3.3.1 Interface with Clock Network
3.3.2 Interface with Combinational Logic
Chapter 4 Pipelining and Timing Analysis
4.1 Analysis of a System that Uses a Flip-Flop
4.1.1 Late Data Arrival Analysis
4.1.2 Early Data Arrival Analysis
Analysis of a System that Uses a Single Latch
4.2.1 Late Data Arrival Analysis
4.2.2 Early Signal Arrival Analysis
Analysis of a System with a Two-Phase Clock
and Two Latches in an M-S Arrangement
Analysis of a System with a Single-Phase Clock
and Dual-Edge-Triggered Storage Elements
4.4.1 Late Data Arrival
4.4.2 Early Data Arrival
Chapter 5 High-Performance System Issues
5.1 Absorbing Clock Uncertainties
Clock Edge
Absorption
5.1.1 Clock-Uncertainty Absorption Using Soft
5.1.2 Timing Analysis with Clock-Uncertainty
5.1.3 Clock-Uncertainty Absorbing Considerations
5.2 Time Borrowing
5.2.1 Dynamic Time Borrowing
5.2.2 Static Time Borrowing
Time Borrowing and Clock Uncertainty
5.3.1 Level-Sensitive Clocking
5.3.2 Soft-Edge-Sensitive Clocking....................
.................................................
总共有9章。

[ 本帖最后由 pipida 于 2009-7-10 22:47 编辑 ]

pipida

Flip-Flop Analysis and Design

里面的Hspice代码都是老O提供的

小哥1900

分的那么散。。。。晕死！！！！鄙视！

小哥1900

原来是按章节分的，情有可原！！我刚才在上面太激动了，向楼主说声道歉。

小哥1900

第一章PPT打不开啊，楼主请检查一下。

risccpu

good, thanks

pipida

检查了一下，原来的真打不开，现在更新一下

lixqing

Take a look, thanks a lot.

ayamitek

Thanks for sharing ..........