[分享]C@libre_2009.1_46 For linux[x86 x86-64]

flatman

Calibre 2009.1_46        May 2009

   :-)


Important Release Information                                                                                       
Release Version Numbers & Licensing
The version for all Calibre products in this release is v2009.1_46. The exact access version is 2009.010 (January 2009).
Calibre Documentation Packaging
For releases prior to 2008.1, the Calibre productdocumentation was packaged with the Calibre software tree and wasautomatically installed in the MGC_HOME directory structure. With the2008.1 and newer releases, the Calibre documentation is now packagedseparately from the Calibre software tree. The documentation isavailable on SupportNet as a separate downloadable file and also on theCalibre Documentation CD. For more information, refer to theCalibre-specific document Installing a Mentor Graphics Install Bundle.
System Requirements
The Calibre tools may require a minimum OS patch level for each supported OS. Please see the Calibre Administrator's Guidefor information on required OS patch levels. For additional informationon system requirements and OS support, please refer to the Calibre Platform Support Overview and Roadmap.

• Notice Regarding Red Hat 3 and SLES 9 Support
  
  Supportfor the Red Hat Enterprise Linux (RHEL) version 3 series and the SUSELinux Enterprise Software (SLES) version 9 series is no longer supported as of Calibre 2009.1.All updates and service packs associated with RHEL 3 and SLES 9 areincluded in the  discontinuation and will no longer be supported inCalibre 2009.1 and subsequent releases.
• Notice Regarding Changes to Default Execution Mode for Sun Solaris
  
  TheCalibre 2008.2 release was the last release in which 32-bit executionmode was the default execution mode on Sun Solaris UltraSPARCcomputers. With the Calibre 2008.3 and 2008.4 releases, the defaultexecution mode changed to 64-bit which can be used with all designs.For Calibre 2008.3 and 2008.4 releases, you can continue to access32-bit execution mode by specifying the -32 switch at invocation or byusing the USE_CALIBRE_32=1 environment variable. Calibre 2009.1 no longer supports 32-bit mode on Solaris.
• Notice Regarding Solaris 8, 9 and 10 Support
  
  Startingwith the earlier Calibre 2007.4 release, the minimum patch levelrequired for Solaris 8 and Solaris 9 systems was updated.
  
  Solaris8 requires the February 2004 Solaris recommended patch cluster, as wellas patches 108434-22 (32-bit libCrun), 108435-22 (64-bit libCrun), and111721-04 (libm).
  
  Solaris 9requires the September 2004 Solaris recommended patch cluster, as wellas patches 111711-16 (32-bit libCrun), 111712-16 (64-bit libCrun), and111722-04 (libm).
  
  Solaris 10 requires the November 2006 Solaris recommended patch cluster.
  
  Laterversions of either the patch clusters or individual patches are alsosupported. Depending on precisely which patch cluster is loaded, youmay or may not need to load the individual patches (they may be bundledwith the patch cluster).

   System Requirements                                                                                                                                                                                                              
                                                
   Release 2009.1_46 Supported Platforms and Processors                                
                                                                                                                                                                        

Linux RHEL 4 IPF Linux RHEL 5 IPF Linux RHEL 4 x86/x86-64 Linux RHEL 5 x86/x86-64 Linux SLES 10 x86/x86-64

Solaris 8 UltraSPARC Solaris 9 UltraSPARC Solaris 10 UltraSPARC Solaris 10 x64

[ 本帖最后由 flatman 于 2009-5-18 08:22 编辑 ]

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

开始下载...

flatman

乘的航班