|
|
马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？注册
x
硬件工程师必备经典书!
这本书偏重于实际，涉及面广，从设计到测试，详细且极具针对性，适合做一本设计实用参考手册。
Chapter 1 describes why it is important to comprehend the lessons taught in this book.
(Authored by Garrett Hall)
Chapter 2 introduces basic transmission line theory and terminology with specific digital
focus. This chapter forms the basis of much of the material that follow. (Authored by Stephen
Hall)
Chapters 3 and 4 introduce crosstalk effects, explain their relevance to digital timings, and
explore nonideal transmission line effects. (Authored by Stephen Hall)
Chapter 5 explains the impact of chip packages, vias, connectors, and many other aspects
that affect the performance of a digital system. (Authored by Stephen Hall)
Chapter 6 explains elusive effects such as simultaneous switching noise and nonideal
current return path distortions that can devastate a digital design if not properly accounted
for. (Authored by Stephen Hall)
Chapter 7 discusses different methods that can be used to model the output buffers that are
used to drive digital signals onto a bus. (Authored by Garrett Hall)
Chapter 8 explains in detail several methods of system level digital timing. It describes the
theory behind different timing schemes and relates them to the high-speed digital effects
described throughout the book. (Authored by Stephen Hall)
Chapter 9 addresses one of the most far-reaching challenges that is likely to be encountered:
handling the very large number of variables affecting a system and reducing them to a
manageable methodology. This chapter explains how to make an intractable problem
tractable. It introduces a specific design methodology that has been used to produce very
high performance digital products. (Authored by Stephen Hall)
Chapter 10 covers the subject of radiated emissions, which causes great fear in the hearts of
system designers because radiated emission problems usually cannot be addressed until a
prototype has been built, at which time changes can be very costly and time-constrained.
(Authored by Garrett Hall)
Chapter 11 covers the practical aspects of making precision measurements in high-speed
digital systems. (Authored by James McCall)
[ 本帖最后由 eagle_tek 于 2008-12-17 17:08 编辑 ] |
|
/2 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2008-12-17 16:54:00
楼主
