发一篇设计内容非常全乎的关于全差分运放设计的论文（共105页）

juhao0122 · 发表于 2009-6-8 20:41:46

thanks for your sharing!

bicyclejoy · 发表于 2009-6-8 21:47:43

谢谢分享！

jcchan · 发表于 2009-6-8 21:52:15

Thanks!!!

ponderboy · 发表于 2009-6-8 22:43:49

good,thanks

soulhenry · 发表于 2009-6-9 15:15:50

这个看起来貌似还不错！

zhengqh123 · 发表于 2009-6-9 15:59:12

差分放大电路是一个很基础的知识，下了好好看。

bluebaby162 · 发表于 2009-6-10 12:48:37

haohaohaohao

ericgjj · 发表于 2009-6-10 13:03:01

这个可以看看

jcchan · 发表于 2009-6-11 09:28:36

Thanks!!!

sli103105 · 发表于 2009-6-11 11:16:39

FYI:
Abstract :
This paper explains the choice made for a full differential operational ampliﬁer. This op amp has been designed for the ﬁrst stage of a pipelined A/D Converter (ADC). This means that it has the highest speciﬁcation of every op amp of all stages, as it concerns the LSB of the ADC. It shows also the solution founded to reach high gain and short settling time, without degrading too much the output swing.
First the operational ampliﬁer speciﬁcation are explained; the different structures tested are then presented and the motivation of the ﬁnal topology choice are shown. It presents then the op amp schematic implementation, the simulation results and the layout with the 0.35um CMOS-AMS design kit.

发一篇设计内容非常全乎的关于全差分运放设计的论文（共105页）

站长推荐 /2