模拟设计方向微电子研究生 工作问题

austin_lin

I would recommend you stick with analog as much as you could (perhaps due to my digital/logic design background, I'm envying guys who possess the analog design expertise). If you look at latest SoC designs from those big companies, you may find that mixed signal is quite essential in these designs (for example, if you want to integrate the PHY for USB, Ethernet or PCIe interconnect, then you would need SerDes, which is analog design indeed) - not to mention there are PLL, ADC, DAC, etc. blocks out there for accompanying digital/logic portion inside the chip.

You may find that sensor technology is getting more and more attention right now (just look at joy stick from Nintendo Wii, for instance) and in long run people would demand more and more sensor feature being integrated into devices.

Therefore, I think the future of being an analog designer shall be very promising - though Intel CTO just suggested recently that people should rethink analog issues from "digital" perspective/domain

semico_ljj

mixed signal is quite essential in these designs

andyjackcao

都一样啦，行行出状元，中国现在很缺微电子人才

ryanbowen40

对模拟而言，电源的确比较好入手。至于工作，虽然公司招模拟的人比较少，但学模拟的人也相对少些，慢慢找，总会有的

xiaoju

我也很当心找工作的问题，不仅是做模拟的，而且还是女生！@

mhtcas

加油啊

mhtcas

模拟的兄弟们加油

mhtcas

其实模拟电路才是真正有钱图的

refugee

我自己就经历过这个过程，结合一下自己和其他同学的经验跟大家分享一下：

模拟的实习工作很难找，除非是老师推荐，否则就算找到都是有条件的，一般要求签合同毕业后在实习公司工作

如果有机会进去实习，确实可以学到很多东西，尤其是对于以前没有接触过实际设计的同学来说，有很多实际的产品接触，很多很有经验的工程师可以请教，当然一般情况下可以看到公司以往的设计，这是个学习的好机会

但是唯一不爽的是可能发论文不是那么好发