matlab hspice

gavingong · 发表于 2011-11-18 11:17:56

回复 10# wildgoat

谢谢哈
loadsig c文件得编译还有post=1 才行

wildgoat · 发表于 2011-11-18 20:55:51

回复 wildgoat

谢谢哈
loadsig c文件得编译还有post=1 才行
gavingong 发表于 2011-11-18 11:17

登录/注册后可看大图

解决了就好

要是能抽时间把你的详细的问题现象及解决步骤总结一下写出来就更好了

yashiro_ukyo · 发表于 2012-6-12 19:19:01

非常需要看看啊！！

91a047 · 发表于 2014-2-7 14:56:39

感謝分享

liqiangsjtu · 发表于 2014-2-8 09:24:59

回复 1# gavingong

请问楼主，为什么需要把波形load到matlab里面呢？哪些情况需要这么做？

dhcchp · 发表于 2016-7-16 01:40:26

(Sorry for missing Chinese input in linux. )
I have no intention to bring this topic again. But I met the similar problem recently with Matlab 2014 and cppsim current version in ubuntu 14.04. Reading test.tr0 from cppsim gets the following error.
------------------------------
x=loadsig('test.tr0')
error in hs_determine_variables: block trailer mismatch
One or more output arguments not assigned during call to "loadsig".
------------------------------
I have not found a suitable solution from the bbs. Then recheck www.cppsim.com, getting the solution. It is already there...
We need to add:
Download Contributed Functions for Hspice Toolbox for Matlab
(hspice_toolbox_contributed.tar.gz)

mex loadsig_new.c; that function is what I want.

Zhangzheh · 发表于 2017-6-9 11:15:59

紫薯布丁

[求助] matlab hspice

站长推荐 /1