metal 1 的宽度为0？

damonzhao

回复 10# xinu2009


    Sroute的时候就用到呀

xinu2009

回复 11# damonzhao


   老兄 我加你下MSN

xinu2009

问题没有解决  继续求解

ayuan1027

同关注！

longjilb

版主，这个问题最后的原因是什么啊

729050850

在关注这个问题，后来咋解决了？

522526tl

回复 13# xinu2009
问下版主 这个问题解决了吗 我也遇到这样的 warnings啦

522526tl

回复 9# damonzhao
版主，我的也遇到了同样问题，lef读入没问题，log部分如下：#Start globalDetailRoute on Fri Nov 21 12:37:24 2014
#
#Generating timing graph information, please wait...
#72096 total nets, 241 already routed, 241 will ignore in trialRoute
#Option routeTdrEffort has been set to 3 by user
#Dump tif for version 2.1
#Write timing file took: cpu time = 00:00:11, elapsed time = 00:00:11, memory = 477.00 (Mb)
#Done generating timing graph information.
#Start reading timing information from file .timing_file.tif ...
#
#The worst setup slack read in is 0.202  
#
#No hold time constraints read in
#Read in timing information for 61 ports, 71940 instances from timing file .timing_file.tif.
#NanoRoute Version v08.10-p008 NR081027-0018/USR58-UB
#WARNING (NREX-28) The height of the first routing layer M1 is 0.000000. It should be larger than 0.000000
#WARNING (NREX-30) Please also check the height and metal thickness values for the routing layers heigher than routing layer M1
#WARNING (NREX-4) No Extended Cap Table was imported. Not enough process information was provided either and default Extended Cap Table database will be used.
#Merging special wires...

请版主指导一二啊

damonzhao

回复 18# 522526tl


   然后就不能跑了？

522526tl

回复 19# damonzhao
能跑，跑完后 0个fails 但是有好多warnings