|
马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。
您需要 登录 才可以下载或查看,没有账号?注册
x
画了一个模拟的版图部分管子被我打散,修改了内部图形
用assura 做drc 报错仅限于金属密度
再用calibre做drc 多了8个warning 求高人解释 大神们救救俺吧
8个warning如下:
有六个类似,由于拷贝不出来,只能手写,就写两个吧
warning: layer 3 contains unmapped objects and is the source layer of LAYER MAP == 3 DATATYPE ==1.
layer 13 contains unmapped objects and is the source layer of LAYER MAP ==13 DATATYPE ==1.
还有两个warning如下,就写一个吧
warning: PROJECTING constraint only supported with PARALLEL ONLY - setting PARALLEL ONLY.
哪位大神发挥一下。。。求助。。。。 |
|