|
|
马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。
您需要 登录 才可以下载或查看，没有账号？注册
x
本帖最后由 benemale 于 2010-4-22 21:33 编辑
BOSS有钱，从美国把印刷版的书买回来了；
火星人没钱，把书附带的CD-ROM资料拷出来了；
里面的工具俺没用过，大家觉得好使就拿去爽哈。
电子版的书在这里：RF Power Amplifiers for Wireless Communications, Second Edition
CD-ROM for “RF Power Amplifiers for Wireless Communications”, S.C.Cripps, Artech House 2006
This CD contains mainly Excel files, some of which are just variations on the “PA Postulator” PA_Waves, described in the book (and used extensively in Chapters 4,6 and 8). In addition to the base program, the CD contains several derivatives, which represent specific settings of input parameters for particular examples in the book. These are denoted by filenames of the form “paw_Fig_6_23”, which enables the reader to quickly generate the plots shown in Figure 6.23.
Several other Excel files relate to modulation formats described in Chapter 9. These reproduce the raw IQ data and the corresponding IQ plots and CCDF bar charts shown in Chapter 9, and have a typical format “OFDM_stats”, e.g. for the 802.11a format. There are also some files which enable rudimentary spectral analysis for stipulated PA non-linear responses for EDGE and OFDM systems (EDGE_ACP and OFDM_ACP). Clearly, these files are all open and can be modified by readers to analyze different PA responses and modulation systems. The files having the form “OFDM_effy” perform statistical analysis of PA efficiency for the stipulated modulation format, as described in Chapter 10.
There is a subdirectory of various CAD circuit design examples described in the book. These use the Microwave Office harmonic balance simulator, which can be downloaded for an evaluation period from the AWR website (www.appwave.com), by all means mention that you want it to run the files from this book. |
|
/2 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2010-4-22 21:31:21
