matlab下仿真CIC抽取滤波器

oceanwangchao

我用脚本建立了一个CIC抽取滤波器的模型，3级积分器级联后，进行4倍降采样，然后级联3级差分器，输入一个正弦波激励，发现第三级积分器输出的信号波形是一条斜上升的直线，已经不收敛了，请大神指点一下，每一级数据累加的过程中还有别的处理步骤吗？以下是我的脚本代码：
close all
clc
clear all
% x_in=[1000,zeros(1,5000)];
% I=10;
n=0:1:16383;
w=2*pi*(1/32);
x_in=0.5*sin(n*w);
D=4;
% figure(1)
% plot(n,x);
% y=fltcic_dec(x,8);
% figure(2)
% plot(y);
%%%%%%%%%%%%%%%%积分部分第一级%%%%%%%%%%%%%%%%%
for ii=1:1:length(x_in)
    if(ii==1)
        int1(1)=x_in(1);
    else
        int1(ii)=x_in(ii)+int1(ii-1);
    end
end
%%%%%%%%%%%%%%%%积分部分第二级%%%%%%%%%%%%%%%%%
for jj=1:1:length(int1)
    if(jj==1)
        int2(1)=int1(1);
    else
        int2(jj)=int1(jj)+int2(jj-1);
    end
end
%%%%%%%%%%%%%%%%积分部分第三级%%%%%%%%%%%%%%%%%
for kk=1:1:length(int2)
    if(kk==1)
        int3(1)=int2(1);
    else
        int3(kk)=int2(kk)+int3(kk-1);
    end
end
%%%%%%%%%%%%%%%%下采样部分%%%%%%%%%%%%%%%%%
% d3_us=[d3_temp;zeros(I-1,length(d3_temp))];
% % d3_us=repmat(d3_temp,I,1);
% int0=d3_us(';
int3_ds=downsample(int3,D);
%%%%%%%%%%%%%%%%梳状部分第一级%%%%%%%%%%%%%%%%%
x1_temp=[int3_ds,0];
ff1_dly=[0,int3_ds];
d1_temp=x1_temp-ff1_dly;
%%%%%%%%%%%%%%%%梳状部分第二级%%%%%%%%%%%%%%%%%
x2_temp=[d1_temp,0];
ff2_dly=[0,d1_temp];
d2_temp=x2_temp-ff2_dly;
%%%%%%%%%%%%%%%%梳状部分第三级%%%%%%%%%%%%%%%%%
x3_temp=[d2_temp,0];
ff3_dly=[0,d2_temp];
d3_temp=x3_temp-ff3_dly;

y_out=d3_temp;

jiangqun78120

谢谢分享

jesien

好像就是这样的诶

huatiantian

very good thanks

huatiantian

good thanks

badegg3

thanks for your sharing

qq1667500670

谢谢分享