这个不错！Netlist ECO, GOF v4.0, Linux 32/64 bits, 不需LIC

dfcan · 发表于 2014-1-15 12:47:20

Does it support new ports, new flops? More important, does it support scan insertion for the new flo ...
vjrao 发表于 2014-1-15 01:06

登录/注册后可看大图

Yes, it supports new ports and new flops. And seems it also supports scan chain stitch for new flops. See command stitch_scan_chain

haobaobaos · 发表于 2014-1-15 13:23:19

不错的资料

vjrao · 发表于 2014-1-16 00:45:27

Yes, it supports new ports and new flops. And seems it also supports scan chain stitch for new f ...
dfcan 发表于 2014-1-15 12:47

登录/注册后可看大图

This is very good. Because I need to make sure that the scan chain is complete. I don't want to stitch scan chain manually.

999 · 发表于 2014-1-16 11:45:36

it's good!
试试！

vjrao · 发表于 2014-1-16 23:38:52

Anyone has used stitch_scan_chain command? How to use it? How to verify the new scan is good? Thanks.

vjrao · 发表于 2014-1-16 23:41:52

Has anyone tried the usage of stitch_scan_chain? How to verify the new scan chain is good? Thanks.

AstPower · 发表于 2014-1-17 06:55:42

我看到这工具还有脚本模式，楼主可试过？

messiwang2011 · 发表于 2014-1-17 10:21:51

回复 5# dfcan

我试过一个设计让gof自己eco，虽然可以成功，但是要调用很多的资源，手动eco其实不需要这么复杂，不知道你遇到这样的情况没有？

messiwang2011 · 发表于 2014-1-17 10:23:22

回复 11# AstPower

你有没有觉得gof自己eco的话比手动eco多用好多的资源呢

messiwang2011 · 发表于 2014-1-17 10:30:43

回复 20# dfcan

还在进一步研究工具中。
最近用gof做过几个项目，eco确实比较快，但是调用的资源比较复杂比较多，不如手工来的简洁。我试过几次让gof调用sparecell里面的cell进行eco，但是gof会报我的资源不够，无法继续下去，最后只能手工eco，其实是很简单的修改。我有点怀疑gof的实用性，不知各位使用如何？

这个不错！Netlist ECO, GOF v4.0, Linux 32/64 bits, 不需LIC

站长推荐 /2