hspice_vG-2012.06-SP1_Win

peterlin2010 · 发表于 2012-12-22 18:07:28

重點是那 src file ..

先前不能用都是此 file 問題 .

xuerenjie124 · 发表于 2012-12-22 19:29:11

回复 4# wz19840313

感谢楼主分享。

limpidyou · 发表于 2012-12-26 18:09:02

感谢啊~
不知道这版有没有新功能~
试试先~

goodstt · 发表于 2012-12-28 11:26:09

不知道WIN8可以使用嗎

bao2xu · 发表于 2012-12-28 16:50:25

cool. is this good for use?

rp2004 · 发表于 2012-12-30 14:41:45

thank you very much indeed. what about saber vG for windows

deseetp · 发表于 2013-1-3 09:54:42

感謝大大分享,有網友確認win環境可以使用嗎?

rp2004 · 发表于 2013-1-3 12:29:00

本帖最后由 rp2004 于 2013-1-3 12:32 编辑

guys, does this hspice have a schematic editor (a program to draw the schematic with)? The one I knew 10 years ago didn't have it and the people had to draw (on paper) the schematic, assign nodes and describe (program) the connections between the nodes. Is was very primitive. Is this still the case or they came up with integrated schematic editor already?

fangmei · 发表于 2013-1-3 21:05:30

guys, does this hspice have a schematic editor (a program to draw the schematic with)? The one I kne ...
rp2004 发表于 2013-1-3 12:29

登录/注册后可看大图

Multisim may be what you needs.

deseetp · 发表于 2013-1-3 21:49:35

謝謝大大分享心得

hspice_vG-2012.06-SP1_Win

浏览过的版块

站长推荐 /1