PLL仿真方法（基于hspice）

bloodylove · 发表于 2011-1-10 18:18:58

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

×

本帖最后由 bloodylove 于 2011-1-10 18:22 编辑

pLL各个部分的仿真方法，包含相位噪声功耗以及各部分关键参数的仿真，对于不熟悉hsipce仿真的同学会很有帮助，在hspice2009里找到的。
PLL_PART_I/
PLL_part_I.doc -- document of "Phase Dector","Charge Pump","Loop Filter" (MS word format)
snsweep.sp -- netlist for steady state analysis with input phase sweep
snnoise.sp -- netlist for noise analysis
Kd.sp    -- netlist for phase detector gain measurement
snmeas.txt -- measurement file needed by above netlist
tsmc018.m  -- mosis TSMC 0.18 micron technology model
  PLL_PART_II/
divider/  -- divider directory
   divider.doc -- document of frequency divider(MS word format)
   divider_by_8_config.sp -- simulation netlist
   port.spi -- port element statement, used in above netlist
   tsmc018.m  -- mosis TSMC 0.18 micron technology model

vco/ -- vco directory
   vco.doc -- document of voltage controlled oscillator(MS word format)
   snpn.sp -- netlist for phasenoise analysis
   snsweep.sp -- netlist for control voltage sweep
   port.spi -- port element statement, used in above netlist
   inc.sp -- measure statement
   tsmc018.m  -- mosis TSMC 0.18 micron technology model
vcoDivider/ -- cosimulation for VCO and Divider
   vcoDivider.doc -- document of VCO and Divider cosimulation(MS word format)
   vcoDivider_config.sp -- netlist for VCO+Divider cosimulation
   tsmc018.m  -- mosis TSMC 0.18 micron technology model

gemini06061978 · 发表于 2011-1-10 19:33:24

thanks for sharing

qiulinfeng · 发表于 2011-1-10 20:26:04

呵呵，谢谢

rongshuxia888 · 发表于 2011-1-10 20:52:09

thanks for sharing

zain · 发表于 2011-1-10 20:59:03

dingyige

jotaro1111 · 发表于 2011-1-10 21:03:45

hope useful

raydcj · 发表于 2011-1-10 21:48:20

好东西，谢谢楼主分享！！

chujn · 发表于 2011-1-11 07:26:01

xiexie

1986tm205 · 发表于 2011-1-11 09:59:04

ajsdhfnkhasduiweafrw3e

QK168 · 发表于 2011-1-11 13:43:50

see see it

账号		自动登录	找回密码
密码			注册

[资料] PLL仿真方法（基于hspice）

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

相关帖子

浏览过的版块

站长推荐 /1