Version 12.0.1 Defect Fixes
===========================
ANSft00090489 - Boundary Display (Solver View) will no longer initiate a desktop crash
without a defined solution setup.
ANSft00090048 - Distributed interpolating sweep solutions could end prematurely in some
cases. This issue has been fixed.
ANSft00090498 - The error criteria will now be properly respected for ports-only
interpolating sweeps.
ANSft00089952 - Resolving a design could invoke a desktop crash if the minimum solved
frequency for a DC extrapolated sweep was modified. This has been
addressed in the patch release.
ANSft00090090 - Radiated power will now be computed correctly when an infinite ground
plane is present in the design.
ANSft00090876 - Interpolating sweep step numbers will now be reported appropriately in
the profile for distributed simulations.
ANSft00090427 - In rare cases, aborting a simulation could cause files to be deleted
unexpectedly from a hard drive. This problem has been corrected in the
patch release.
ANSft00090752 - Design topology changes that occur during an Optimetrics' analysis will
no longer cause the mesher to hang indefinitely.
/2 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2010-8-16 21:26:58
