TannerToolsV14.11下载链接

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

vanduongbk

you have crack 14.11
crack of 14 can use for 14.11

peterlin2010

樓上發壹堆 是要 ??

ledit  都到14

不過 不知道功能增加那些 ??

LEDIT 好像往 mems 開使用走
還有 好像開始出linux 版本 不知道 會不會 影響到 laker ?

HiPerSiliconv2
HiPer Silicon is Tanner EDA’s complete software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs. HiPer Silicon consists of fully-integrated front end and back end tools, from schematic capture, circuit simulation, and waveform probing to physical layout and verification. Its advanced features improve designer productivity, including foundry-compatible physical verification, Verilog-A simulation, interactive autorouting,and device layout automation.

==> Schematic Drive Layout: SDL & SDL Router
有和 p&r
但是 能否吃 verilog netlist ??

HiPer PX is a high performance parasitic extraction tool that is integrated with Tanner’s L-Edit layout editor for easy and rapid extraction of parasitics.
==> 類似 dracula 或calibre extract
但是 得foundary 提高command 吧



Tanner Tools Pro
is a software suite for the design, layout and verification of analog, mixed-signal, RF and MEMS ICs. Tanner Tools Pro consists of fully-integrated front end and back end tools, from schematic capture, circuit simulation, and waveform probing to physical layout and verification

ericchen228

Thanks for sharing!