A Fully Integrated Touch Screen Controller

hi_china59

A Fully Integrated Touch Screen Controller Based on 12b 825kS/s SAR ADC
Stefano Pietri, Alfredo Olmos, Michael Berens

Abstract - This paper describes a low-power 12 bits 825kS/s Successive Approximation Register Analog to Digital Converter (SAR ADC) for personal digital assistants, portable instruments, and
touch-screen monitor applications. The proposed SAR ADC is based on 3-stage 4-4-4 C-DAC architecture and a high-speed 3-stages comparator. It features 8 general-purpose input channels and 8 dedicated channels supporting 4, 5, 7, and 8-wire resistive touch-screen panels. It has a full-scale input range, power-down mode for low current consumption, and a novel pen-touch detection control with fast response able to support any touch-screen panel. The ADC performs ±1.3 LSB DNL and ±5 LSB INL when tested up to 125C at supply voltages ranging from 2.7V to 3.6V.  Fabricated in a 0.13um CMOS with fringe capacitors, it occupies an area of 0.17 mm2 and has a total dissipation of 200uA at full speed. The circuit has been integrated on Freescale MCF5227x Micro-Controller Unit (MCU) family of devices with a 166 MHz ColdFire(R) core processor and an LCD controller.

apteye

thanks

hsn

thank you...

ttanalog

Thanks

jordan76

kankan

梦中雪落

值得看看 1# hi_china59

simon110132

thanks for sharing

mtwumtwu

good reference for touch screen design

xlteam17

very good

adc9a6

good material