DRC脚本报错，怎么解决？

cj_181888888 · 发表于 2022-10-13 16:17:11

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

您需要登录才可以下载或查看，没有账号？注册

x

#!/bin/csh -f
set cell_name = $1
set drc_rule = "your_drc.cal"
set gds_dir = "../gds"
sed -e 's#$LAYOUT PRIMARY$.*#\1 \"'$cell_name'\"#g' \
      -e 's#$LAYOUT PATH$.*#\1 \"'$gds_dir/$cell_name.gds'\"#g' \
      -e 's#$DRC SUMMARY REPORT$.*#\1 \"'drc.rep'\"#g' \
      $drc_rule >! _drc.cal_

calibre -drc -64 -hier -hyper -turbo 2 _drc.cal_
grep "TOTAL Result Count = [1-9]" drc.rep

报错：ERROR:Failure to read input file ...xxx.gds at record offset 46137338

603012358 · 发表于 2022-10-13 17:02:22

路径

note30933 · 发表于 2022-10-13 17:16:53

xxx.gds at record offset 46137338 =>看起来好像gds file有问题

note30933 · 发表于 2022-10-13 17:30:08

sed -e 's#$layout PRIMARY$.*#\1 \"'$cell_name'\"#g' \　改成　sed -e 's#$LAYOUT PRIMARY$.*#\1 \"'$cell_name'\"#g' \ 试看看　

tosayes · 发表于 2022-10-13 22:53:03

报错：ERROR:Failure to read input file ...xxx.gds at record offset 46137338

这个应该是gds文件格式错误，需要重新做gds文件

cj_181888888 · 发表于 2022-10-17 13:41:47

note30933 发表于 2022-10-13 17:30
sed -e 's#$layout PRIMARY$.*#\1 \"'$cell_name'\"#g' \　改成　sed -e 's#$LAYOUT PRIMARY$.*#\1 \"' ...

嗯嗯改好了
谢谢

cj_181888888 · 发表于 2022-10-17 13:43:38

tosayes 发表于 2022-10-13 22:53
报错：ERROR:Failure to read input file ...xxx.gds at record offset 46137338

这个应该是gds文件格式错 ...

要什么样的格式？

johs01 · 发表于 2022-10-26 12:22:05

本帖最后由 johs01 于 2022-10-26 12:23 编辑

It is possible to ignore the lowercase and uppercase in the following script.
It has been changed from "g" to "gi" on the sed command.

#!/bin/csh -f
set cell_name = $1
set drc_rule = "your_drc.cal"
set gds_dir = "../gds"
sed -e 's#$layout PRIMARY$.*#\1 \"'$cell_name'\"#gi' \
      -e 's#$LAYOUT PATH$.*#\1 \"'$gds_dir/$cell_name.gds'\"#gi' \
      -e 's#$DRC SUMMARY REPORT$.*#\1 \"'drc.rep'\"#gi' \
      $drc_rule >! _drc.cal_

calibre -drc -64 -hier -hyper -turbo 2 _drc.cal_
grep "TOTAL Result Count = [1-9]" drc.rep

ncash0933 · 发表于 2022-10-26 15:40:31

顶一下

[求助] DRC脚本报错，怎么解决？

马上注册，结交更多好友，享用更多功能，让你轻松玩转社区。

站长推荐 /2