lattice利用vcs仿真库添加不上

chenlidong

vcs错误提升如下所示：
Error-[CFCILFBI] Cannot find cell in liblist
./../../rtl/TOP/top.v, 88
  Cell 'OSCI' cannot be found in liblist for binding instance.
  Liblist: work



添加库如下所示：1.        Create local folder for the work library:
mkdir work2.        Create (or modify) your local synopsys_sim.setup file, and add the following lines:
WORK > DEFAULTDEFAULT : ./work3.        Analyze the machxo2_black_boxes modules from their encrypted Verilog source file as follows:
vlogan +v2k <install_dir>/cae_library/simulation/blackbox/machxo2_black_boxes-vcs.vp4.        Compile your SystemVerilog files and simulate your design with top-level unit (test bench):
vcs -mhdl -RI <design_name>.v <test_bench>.v -y <install_dir>/cae_library/simulation/Verilog/machxo2 +libext+.v


请教如下才能在vcs上添加lattice  black_boxes的库？

amic14

Probably you have to add crystal specific compiled libraries to simulator/

smh

thankss

dario_1467

thank you for sharing

chenlidong

到此为止了，我已经找到答案了

总钻风

怎么解决的，求分享