modelsim6.5应用DPI的问题

wypgilbert · 发表于 2012-9-7 11:29:06

您需要登录才可以下载或查看，没有账号？注册

x

最近需要用到DPI进行C代买和verilog的仿真验证，工具限定为modelsim（没办法）。参照ModelSim? SE User’s ManualSoftware Version 6.5f，应用DPI有5个step如下：

1. Run vlog to generate a dpiheader.h file.
This file defines the interface between C and ModelSim for exported and imported tasks and functions. Though the dpiheader.h is a user convenience file rather than a requirement, including dpiheader.h in your C code can immediately solve problems
caused by an improperly defined interface. An example command for creating the header file would be:
vlog -dpiheader <dpiheader>.h files.v
2. Required for Windows only; Run a preliminary invocation of vsim with the-dpiexportobj switch.Because of limitations with the linker/loader provided on Windows, this additional step is required. You must create the exported task/function compiled object file (exportobj) by running a preliminary vsim command, such as:vsim -dpiexportobj exportobj top3. Include the dpiheader.h file in your C code.ModelSim recommends that any user DPI C code that accesses exported tasks/functions, or defines imported tasks/functions, should include the dpiheader.h file. This allows the C compiler to verify the interface between C and ModelSim.4. Compile the C code into a shared object.Compile your code, providing any .a or other .o files required.For Windows users — In this step, the object file needs to be bound together with the.obj that you created using the -dpiexportobj switch, into a single .dll file.5. Simulate the design.

复制代码

其他步骤都还好，但STEP4的For Windows user部分，该如何将C源文件编译生成的.o和第二部生成的.obj链接成为一个.dll文件呢？？
查了好多资料都没搞定，同学也没有这方面的经验。还请懂的前辈们多多赐教啊！！

wypgilbert · 发表于 2012-9-7 13:39:08

自己顶下，别沉了啊！

parktaemung · 发表于 2012-9-7 15:55:08

xie xie fen xiang !

tiangua · 发表于 2012-9-7 20:57:42

看看你的 modelsim安装文件夹里面有没有一个gcc？
如果有的话，就用这个。没有的话你就悲剧了。

katina · 发表于 2012-11-8 09:42:28

帮顶，gcc文件哪里可以下载啊，我也在用modelsim6.5仿真

tommy12012 · 发表于 2013-3-23 17:06:34

xie xie fen xiang !

glk47 · 发表于 2013-4-1 13:08:38

DPI不是用gcc编译的，不需要下载gcc
可以先用visual studio建立一个dll（动态库）的项目，编译生成dll文件。编译要用到modelsim生成的若干头文件。编译完成后吧dll复制到modelsim的项目里，就可以了

aprilzww · 发表于 2014-4-10 14:57:32

DPI不是用gcc编译的，不需要下载gcc
可以先用visual studio建立一个dll（动态库）的项目，编译生成dll文件 ...
glk47 发表于 2013-4-1 13:08

登录/注册后可看大图

你是说把C文件在VS中编译成dll文件？

长安客2014 · 发表于 2015-3-6 22:20:26

同求，楼主问题解决了没？

[求助] modelsim6.5应用DPI的问题