questasim10.0a+UVM

zhaowf

昨天在用questasim10.0a编译dpi库的时候，报了下面的错误：
# In file included from D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:29:
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_regex.cc:29:22: error: vpi_user.h: No such file or directory
# In file included from D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:30:
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:23:22: error: veriuser.h: No such file or directory
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:24:19: error: svdpi.h: No such file or directory
# In file included from D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:29:
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_regex.cc: In member function 'int uvm_re_cache::re_match(const char*, const char*)':
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_regex.cc:124: error: 'PLI_BYTE8' was not declared in this scope
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_regex.cc:124: error: expected primary-expression before ')' token
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_regex.cc:124: error: 'vpi_printf' was not declared in this scope
# In file included from D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:30:
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c: In function 'int uvm_hdl_max_width()':
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:49: error: 'vpiHandle' was not declared in this scope
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:49: error: expected `;' before 'ms'
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:50: error: 's_vpi_value' was not declared in this scope
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_hdl.c:50: error: expected `;' before 'value_s'
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:34: error: expected `}' at end of input
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc: At global scope:
# D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc:34: error: expected `}' at end of input

我使用的命令是D:/questa_sim_10.0a/gcc-4.2.1-mingw32vc9/bin/g++.exe \
        -g \
        -DQUESTA \
        -W \
        -shared \
        -Bsymbolic \
        -ID:/questa_sim_10.0a/gcc-4.2.1-mingw32vc9/include \
        D:/questa_sim_10.0a/verilog_src/uvm-1.0/src/dpi/uvm_dpi.cc \
        -o D:/questa_sim_10.0a/verilog_src/uvm-1.0/lib/uvm_dpi.dll \
  D:/questa_sim_10.0a/win32/mtipli.dll -lregex
因为我没有uvm_dpi.dll文件，所以就用上面的命令先生成，不知道怎么会报出这种错误，我用的库是从官网上下啊，怎么会没有需要的文件？
求大神指点！

Youacool

请问楼主这个问题解决没有啊，我也遇到同样的问题了，不知道怎么解决啊

yreyra

谢谢楼主...

witshine

vpi_user.h不在你包含的路径下，应该加 -ID:/questa_sim_10.0a/include 也就是-I$(QUESTASIM_PATH)/include

skjeon78

good job~~~