rockylinux8.10自动读取cadence环境,就无法打开terminal

huanghua5211

# .bashrc

# Source global definitions
if [ -f /etc/bashrc ]; then
        . /etc/bashrc
fi

# Uncomment the following line if you don't like systemctl's auto-paging feature:
# export SYSTEMD_PAGER=

# User specific aliases and functions

########################cadence virtuoso studio#####################
export CADHOME=/edatools/cadence2024
export SPECTRE_DEFAULTS=-E
export LANG=C
export CDS_Netlisting_Mode=Analog
export CDS_ENABLE_VMS=1
export CDS_LOAD_ENV=CWD

export CDS=$CADHOME/IC231
export CDSDIR=$CDS
export CDSHOME=$CDS
export CADENCE_DIR=$CDS
export CDS_INST_DIR=$CDS
export CDS_ROOT=$CDS
export PATH=$CDSDIR/tools/binCDSDIR/tools/dfII/binPATH

export CDS_SPECTRERF_FBENABLE=1

export CDS_LIC_FILE=$CADHOME/license/license_studio.dat
export CDS_LIC_ONLY=1
export CDS_AUTO_64BIT=ALL
export OA_UNSUPPORTED_PLAT=linux_rhel50_gcc44x
export W3264_NO_HOST_CHECK=1


#####SPECTRE2410#####################
export SPECTRE_HOME=$CADHOME/SPECTRE241
export PATH=$SPECTRE_HOME/binSPECTRE_HOME/tools/bin:$PATH
export CDS_SPECTRE_FBENABLE=1


#########XCELIUMMAIN2024###################
export XCELIUMMAIN_HOME="/edatools/cadence2024/XCELIUMMAIN2409"
export PATH=$XCELIUMMAIN_HOME/bin:$XCELIUMMAIN_HOME/tools.lnx86/bin:$XCELIUMMAIN_HOME/tools.lnx86/dfII/bin:$PATH
export AMSSPICE_SPECTRE_DEBUG=YES

##############mentor2024###############
export MENTOR_HOME=/edatools/mentor2024
export CALIBRE_HOME=$MENTOR_HOME/calibre2024/aoj_cal_2024.1_28.16
export MGC_HOME=$CALIBRE_HOME
export MGLS_LICENSE_FILE=$MENTOR_HOME/license/license.dat
export PATH=$CALIBRE_HOME/bin:$PATH
export MGC_LIB_PATH=$CALIBRE_HOME/lib
export CALIBRE_ENABLE_SKILL_PEXBA_MODE=1
export MGC_CALIBRE_REALTIME_VIRTUOSO_ENABLED=1
export LD_LIBRARY_PATH=$CALIBRE_HOME/shared/pkgs/icv/tools/calibre_client/lib/64:$LD_LIBRARY_PATH
export MGC_CALIBRE_REALTIME_VIRTUOSO_SAVE_MESSENGER_CELL=1
export MGC_CALIBRE_SAVE_ALL_RUNSET_VALUES=1
export MGC_CALIBRE_LAYOUT_SERVER=127.0.0.1:1989
export MGC_CALIBRE_SCHEMATIC_SERVER=127.0.0.1:9199
export CALIBRE_ENABLE_CLASSIC_CI_DRC=1
export CALIBRE_ENABLE_CLASSIC_CI_LVS=1
export CALIBRE_ENABLE_CLASSIC_CI_PERC=1
export CALIBRE_ENABLE_CLASSIC_CI_PEX=1
export USE_CALIBRE_VCO=aoj

alias icfb='virtuoso &'
alias calib='calibre -gui'


#export CDS_LOG_PATH=/home/maxwell/virtuoso_workspace/

huanghua5211

   

crz4u 发表于 2025-6-24 17:24
export LANG=C改成export LANG=en_US.UTF-8或注释掉

取消这个影响大吗?

huanghua5211

   

cxk520 发表于 2025-6-25 08:06
这个问题我在rhel 8中也遇到过，不知道root cause是什么。

我的解决方法是，将这些eda工具的环境变量写到 ...

一样的