求 Catapult C v2013.x

andy2000a

使用 VERILOG 不行嗎?
以前還沒有 system verilog , system C 做LOGIC 都是 verilog
還沒有 RTL 前
還使用 schematic 去兜電路
何況越高階你越依靠EDA  反而 RTL ..你不怕EDA TOOLS 做出來做錯或是  太大嗎?
10多年前我改做 mix mode , analog 後慢慢發現 電路小  和巧

simple is best ..
簡單東西BUG 會少些.

xxxyyy114

使用 VERILOG 不行嗎?
以前還沒有 system verilog , system C 做LOGIC 都是 verilog
還沒有 RTL 前
還使 ...
andy2000a 发表于 2014-2-15 09:08

                               
登录/注册后可看大图

    现在电路的规模越来越大，上市时间越来越紧，如果不采用更先进的eda工具，
还是采用手工作坊式的方式去设计电路，进度是不可能保证得了的。
据说在eda工具兴起之前，硅谷熟练的工程师每人每天的设计能力也就是几十个晶体管，
要是按这个方式去设计，一个几百万门的电路要搞到猴年马月啊

andy2000a

回复 12# xxxyyy114


    不過 有些新軟體不可能如此 快

有

2011  


http://bbs.eetop.cn/thread-319051-1-1.html

yaoguaiws

回复 10# Seeker321

appreciating for your post.
does Calypto release any new version, such as Catapult v2013.x (windows or linux)?
it's a little bit strange that they name the software 2011.x but released in 2013.

jlqsczw_2007

I have been using CatapultC for more than 3 years. There are unlimited number of questions about it. ...
http://communities.mentor.com/mgcx/community/asic_fpga/esl
ald_syn_cad 发表于 2014-2-14 01:00

                               
登录/注册后可看大图

It seems that this forum does not talk about issues of Catapult any more.
How could we deal with it ???

ald_syn_cad

It seems that this forum does not talk about issues of Catapult any more.
How could we deal with  ...
jlqsczw_2007 发表于 2014-2-16 20:36

                               
登录/注册后可看大图

Yes you're right.
After selling the product to Calypto, only paid customers' questions can be answered in the Calypto itself. "Stuart clubb" in there was the CatapltC's professional that was answering all the questions. You can find him in www.linkedin.com (World's Largest Professional Network).

Seeker321

回复 14# yaoguaiws
Please look in the release note if you don't believe me.
Catapult Release 2011a.183 Update7 was released in April 2013.
catapult_relnotes.pdf (467.87 KB, 下载次数: 20 )

2014-2-17 05:47 上传

点击文件名下载附件

yaoguaiws

回复 17# Seeker321

hi, guy, don't think too much...
i'm just not not-believe you, but feel a little bit strange about Calypto's software naming strategy.
:- )
any way, thanks for your post and resource.

ald_syn_cad

Any accessibility to 2013 or 2014 version?

ald_syn_cad

Does anyone have the newer version?
Thanks!