在线咨询 切换到宽版
eetop公众号 创芯大讲堂 创芯人才网

 找回密码
 注册

手机号码,快捷登录

手机号码,快捷登录

搜帖子
查看: 6395|回复: 8

[求助] 用starrc参数提取后的spe网表在spectre中后仿与前仿没区别

[复制链接]
发表于 2012-7-27 11:12:46 | 显示全部楼层 |阅读模式

马上注册,结交更多好友,享用更多功能,让你轻松玩转社区。

您需要 登录 才可以下载或查看,没有账号?注册

×
我用starrc产生的spe网表信息直接去替换spectre前仿后产生的input.scs文件里的电路信息,但是仿真结果和前仿没有任何区别,这是怎么回事呢?
发表于 2012-7-27 16:06:21 | 显示全部楼层
what is this spe format? is this typo? should be spf (dspf)?
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-7-28 10:43:11 | 显示全部楼层
回复 2# maucan


in order to simulate in the spectre, spf is transformed into spe type.   the cmd is : spp -convert <*.spf>  *.spe
回复 支持 反对

使用道具 举报

发表于 2012-7-28 12:14:29 | 显示全部楼层
normally i just use the include statement to include the spf file for post-layout spectre simulation, didn't do any conversion as spectre is able to read in spice syntax without problem through include.

I guess your problem might be due to the netlist syntax problem where the instance terminal doesn't hook up correctly to the parasitic netlist and top level port with input source? cannot really comment much without looking at the netlist.
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-7-28 21:25:38 | 显示全部楼层
回复 4# maucan


     i has tried using spectre to load the spf netlist,but failed. the port was also right. last  i put the new copied scs file into a new folder and used ocn script to run simulaiton,i succeeded..
   i thought the include file is not changed when i begin to post-layout simulation,ade reload the old netlist
回复 支持 反对

使用道具 举报

发表于 2012-7-30 23:03:58 | 显示全部楼层
yeah, sometime ADE will not rerun if the main netlist does not change. you may try run spectre manually to avoid that.

about the simulation result same btw pre-layout and post-layout, i cannot really comment much without looking at the netlist.... is the netlist big? if not, can you copy and paste some of them here?
回复 支持 反对

使用道具 举报

 楼主| 发表于 2012-8-1 10:01:36 | 显示全部楼层
回复 6# maucan


    thank u for your help~~it seems hard to copy the netlist out of the server,i ll try it.
回复 支持 反对

使用道具 举报

发表于 2016-7-7 13:53:35 | 显示全部楼层
请问一下怎样通过命令用spectre直接对netlist仿真,以及如何查看仿真结果。谢谢!
回复 支持 反对

使用道具 举报

发表于 2020-9-10 13:42:21 | 显示全部楼层
最近刚用starrc提取出来的版图进行后仿,没有走通,楼主可以指导一下spf格式的文件怎么到spectre进行仿真吗?
回复 支持 反对

使用道具 举报

您需要登录后才可以回帖 登录 | 注册

本版积分规则

关闭

站长推荐 上一条 /1 下一条

手机版| 小黑屋| 关于我们| 联系我们| 隐私声明| EETOP 创芯网
( 京ICP备:10050787号 京公网安备:11010502037710 )

GMT+8, 2025-8-15 20:35 , Processed in 0.018583 second(s), 4 queries , Gzip On, Redis On.

eetop公众号 创芯大讲堂 创芯人才网
快速回复 返回顶部 返回列表