|
|
楼主 |
发表于 2010-12-6 22:13:28
|
显示全部楼层
说明：
Thank you for using Microsemi's Libero IDE software.
*******************************************************************************
The attached license enables operation of Libero IDE Gold per the terms of the license agreement you accepted during your software installation.
Libero Gold now includes a feature line for Synplify Pro AE!
SEE THE NOTE AT THE BOTTOM OF THIS INSTRUCTION REGARDING USE OF SYNPLIFY PRO AE IN LIBERO IDE.
You should check the Hard Disk ID in this license file to be sure it matches the disk id of the target PC.
THIS LICENSE DOES NOT SUPPORT USE OF REMOTE DESKTOP.
NODE-LOCKED LICENSE INSTALLATION:
COPY ATTACHED FILE TO YOUR SYSTEM
*********************************
1. Create a folder named flexlm under your c: drive.
2. Save the attached license.dat file in the flexlm folder. Alternately, you can save the license.dat in another folder in your c: drive. Be sure that you do not already have a license.dat file in this same directory that this could conflict with.
SET LM_LICENSE FILE AND SYNPLCTYD_LICENSE_FILE ENVIRONMENT VARIABLES
*********************************************************************
3. Bring up Control Panel.
4. Double click on 'System'.
5. In the 'Systems Properties' dialog click on the 'Advanced' tab.
6. Click on the 'Environment Variables' button.
IF LM_LICENSE_FILE IS ALREADY LISTED IN USER VARIABLES:
7. Select it, then click 'Edit'.
8. Add the path to the Actel license.dat file after any existing Variable Value, separated with a semicolon, or replace the existing Value. Be sure to retain the license.dat file name and extension at the end of the path.
Go to Step 11.
IF LM_LICENSE_FILE IS NOT LISTED IN USER VARIABLES:
7. Click on the top most 'New' button. 'New User Variable' should be visible.
8. In the 'Variable Name' field type: 'LM_LICENSE_FILE' (no quotes).
9. In the 'Variable Value' field type: c:\flexlm\license.dat (or path to your license location).
10. Click OK.
ADD SYNPLCTYD_LICENSE_FILE TO USER VARIABLES: (NOTE: the correct spelling is SYNPLCTYD_LICENSE_FILE)
11. Click on the top most 'New' button. 'New User Variable' should be visible.
12. In the 'Variable Name' field type: 'SYNPLCTYD_LICENSE_FILE'(no quotes).
13. In the 'Variable Value' field type: 'c:\flexlm\license.dat'(no quotes).
14. Click OK.
15. Click OK to save new Environment Variables and return to System Properities. Click OK to exit.
AFTER INSTALLLING THIS LICENSE, FOLLOW THE STEPS BELOW TO USE SYNPLIFY PRO AE IN LIBERO IDE.
1. OPEN Libero IDE.
2. From the toolbar, click Project => Profiles
3. The Profiles Dialog opens.
4. Click on the 'Add' button, and select 'Synthesis'
5. When the Add Profile Dialog opens, enter the name "Synplify Pro AE"
6. On the 'Select a Tool For Integration' pull down, select "Synplify"
7. In the Location window, browse to find and select 'synplify_pro.exe'. In a typical Libero IDE installation this will be c:\\Libero\Synplify\Synplify_version#\bin\synplify_pro.exe
8. Click 'Open', and 'OK', 'OK' to save and close the Profile
9. You should now be able to launch Synplify Pro.
THIS LICENSE DOES NOT SUPPORT USE OF REMOTE DESKTOP.
For more information email tech@actel.com for assistance.
You can also refer to the Actel Libero IDE Installation and Licensing Guide under the User's Guides and Manuals section at
http://www.actel.com/techdocs/manuals/default.aspx
The Synopsys License Guide is located at http://www.actel.com/documents/synplicity_licensing_ug.pdf
******************************************************************************* |
|
/1 
eetop公众号
创芯大讲堂
创芯人才网
发表于 2010-12-6 22:12:25
