|
|
发表于 2006-1-5 14:54:07
|
显示全部楼层
cadence的ftp文件目录列表
AMS Methodology Kit - Installation Instructions
===============================================
The AMS Methodology Kit is composed of (3) workshops and a software bill of
materials based upon the Linux platform and specific software versions. The
software IS NOT included in the AMSKIT51. It must be downloaded separately.
Workshops:
---------
AMS Top-Level Simulation Workshop (AMSTL)
AMS Block Creation Workshop (AMSBC)
Analog Driven Physical Implementation Workshop (ADPI)
Software Bill of Materials:
--------------------------
ADPI AMSBC AMSTL
ASSURA314_USR1 (3.1.4 USR1)------------------------------- X X X
*IC5141_ISR200511040915 (5.1.41.500.2.24) ---------------- X X X
ICC11241_USR1 (11.2.41.01)-------------------------------- X
IUS55_Base (IUS55 FCS P4) -------------------------------- X
MMSIM60_USR1 (6.0.1 USR1) -------------------------------- X
*NEOCKT32_ISR200511041410 (3.2.8 ISR) -------------------- X
NEOCELL34_ISR200511040755 (3.4 USR2) --------------------- X
SOC42_USR2 (RC 5.1_USR2) --------------------------------- X
VSDE41_USR1 (04.10_USR1.150) ----------------------------- X
Note: * If an ISR is no longer available, use a newer software version.
Installed Disk Space Requirements:
---------------------------------
ASSURA314_USR1 1.187 GB ADPI 124 MB
IC5141_ISR24 2.965 GB AMSBC 40 MB
ICC11241_USR1 0.305 GB AMSTL 799 MB
IUS55_FCS 2.004 GB EtherPHY DB 770 MB
MMSIM60_USR1 1.204 GB
NEOCELL34_USR2 0.326 GB
NEOCKT32_ISR8 0.650 GB
SOC42_USR2 1.479 GB
VSDE41_USR1 0.453 GB
Software BOM 10.573 GB Workshop Total 1.692 GB
Installation of the AMS Methodology Kit assumes the use of InstallScape for
BOTH Installation and Configuration steps. The downloaded files are encrypted
and will require a license with the feature AMS_Methodology_Kit be available
from your license server. During the installation process, the Configuration
step will attempt to checkout this license feature and if it cannot,
installation of AMSKIT will fail.
-------------------------------
Section 1: Setting Up Licensing
-------------------------------
1. You must have received a new license file from Cadence that contains
AMS_Methodology_Kit license.
2. If you have already setup your license server to serve AMS_Methodology_Kit
license then proceed to step 6.
3. If you have a license and you need help setting up the license server please
contact support@cadence.com for further assistance.
5. If you do not have a license, please contact your Cadence representative for
further assistance.
6. set CDS_LIC_FILE environment variable to point to your license server.
eg. setenv CDS_LIC_FILE 5280@server1.
Make sure this variable is set in your .cshrc or .profile so that it is
globally visible.
-------------------------------
Section 2: Running InstallScape
-------------------------------
1. Follow the instruction for installing InstallScape at
http://downloads.cadence.com. Use InstallScape for Installation and
Configuration of the AMS Methodology Kit.
2. The AMS Methodology Kit has been validated with a specific software bill of
materials on the Linux platform. It is highly recommended that the software
versions listed above be used with the workshops.
---------------------------
Section 3: Kit Installation
---------------------------
After installation and configuration, a collection of *.tgz files will be found
in <kit_install_dir>/kits/AMSKIT51. Each workshop contains a setup.csh which
will require local customization and a workshop manual in the form of a pdf
document which may be viewed with xpdf or printed.
1. To simplify the workshop setup process, create a directory such as
<kit_install_dir>/kits/AMSKIT51/software_lnx86 which includes links or
installations of workshop related software:
ls <kit_install_dir>
ASSURA314_USR1IUS55_FCS NEOCKT32_ISR8 cds_license.dat
IC5141_ISR24MMSIM60_USR1 SOC42_USR2
ICC11241_USR1NEOCELL34_USR2 VSDE41_USR1
2. The AMS Methodology Kit contains 3 workshops which leverage a common
EtherPhy database. The kit is structured to operate within a defined
directory structure which should be copied to a local workspace.
Example script for setting up ADPI workshop:
cd <kit_working_dir>
cp <kit_install_dir>/kits/AMSKIT51/FLOW_ETHER_CDK090_CDB_v2.3e.tgz .
cp <kit_install_dir>/kits/AMSKIT51/adpi_flow_workshop_5.1.0.3.tgz .
tar zxvf FLOW*.tgz
tar zxvf adpi*.tgz
Example AMS Kit working directory structure:
<kit_working_dir>/
adpi_flow_workshop: Analog Driven Physical Implementation Flow Workshop
amsbc_flow_workshop: AMS Block Create Flow Workshop
amstl_flow_workshop: AMS Top-Level Flow Workshop
FLOW_ETHER_CDK090: Shared design + library data. ALL workshops use this.
To simplify the setup scripts, create a link to the workshop software
installation directory created in step #1 of Section 3.
3. Each workshop has a setup.csh which will need to be modified for your
working environment. For the software installation, it is easiest to create
a link from your working environment back to the kit software installation.
For example:
cd <kit_working_dir>
ln -s <kit_install_dir>/kits/AMSKIT51/software_lnx86 .
In the setup.csh found in each workshop directory, change the value for
KITHOME to point to <kit_install_dir>/kits/AMSKIT51/software_lnx86. In
addition to software setup, there are environmental variables and alias
definitions which will be referenced by each of the workshops. Be sure to
source the setup.csh before starting each workshop.
4. Make sure the license managers are running and licenses are valid:
lmstat -c $CDS_LIC_FILE -a
5. While a specific sequence is not required for running the workshops, the
recommended order is:
a. asmtl_flow_workshop
b. amsbc_flow_workshop
c. adpi_flow_workshop
6. Workshop pdf documents may be found in the top-level of the workshop
directory. They may be printed or viewed using xpdf.
|
|
/2 
eetop公众号
创芯大讲堂
创芯人才网
楼主
