Advanced dc-dc converters

laobo

经典书

Book Description
DC/DC conversion techniques have undergone rapid development in recent decades. With the pioneering work of authors Fang Lin Luo and Hong Ye, DC/DC converters have now been sorted into their six generations, and by a rough count, over 500 different topologies currently exist, with more being developed each year. Advanced DC/DC Converters offers a concise, practical presentation of DC/DC converters, summarizing the spectrum of conversion technologies and presenting many new ideas and more than 100 new topologies. The treatment begins with background material on DC/DC conversion and discussions on voltage lift and super-lift converters. It then proceeds through each generation, including the groundbreaking sixth generation--converters developed by the authors that can be cascaded for high voltage transfer gain. More than 320 figures, 60 tables, and 500 formulae allow you to more easily grasp the overall structure of advanced DC/DC converters, provide fast access to precise data, and help you quickly determine the values of your own circuit components. Nowhere else in the literature are DC/DC converters so logically sorted and systematically introduced. Nowhere else can you find detailed information on prototype topologies that represent a major contribution to modern power engineering.

Book Info
Text offers a presentation of DC/DC converters; summarizing the spectrum of conversion technologies, presenting many new ideas, and containing more than 100 new topologies. For engineering students and practicing professionals. DLC: DC-to-DC converters.

Contents
1 Introduction
1.1 Historical Review
1.2 Multiple-Quadrant Choppers
1.2.1 Multiple-Quadrant Operation
1.2.2 The First-Quadrant Chopper
1.2.3 The Second-Quadrant Chopper
1.2.4 The Third-Quadrant Chopper
1.2.5 The Fourth-Quadrant Chopper
1.2.6 The First and Second Quadrant Chopper
1.2.7 The Third and Fourth Quadrant Chopper
1.2.8 The Four-Quadrant Chopper
1.3 Pump Circuits
1.3.1 Fundamental Pumps
1.3.1.1 Buck Pump
1.3.1.2 Boost Pump
1.3.1.3 Buck-Boost Pump
1.3.2 Developed Pumps
1.3.2.1 Positive Luo-Pump
1.3.2.2 Negative Luo-Pump
1.3.2.3 Cúk-Pump
1.3.3 Transformer-Type Pumps
1.3.3.1 Forward Pump
1.3.3.2 Fly-Back Pump
1.3.3.3 ZETA Pump
1.3.4 Super-Lift Pumps
1.3.4.1 Positive Super Luo-Pump
1.3.4.2 Negative Super Luo-Pump
1.3.4.3 Positive Push-Pull Pump
1.3.4.4 Negative Push-Pull Pump
1.3.4.5 Double/Enhanced Circuit (DEC)
1.4 Development of DC/DC Conversion Technique
1.4.1 The First Generation Converters
1.4.1.1 Fundamental Converters
1.4.1.2 Transformer-Type Converters
1.4.1.3 Developed Converters
1.4.1.4 Voltage Lift Converters
1.4.1.5 Super Lift Converters
1.4.2 The Second Generation Converters
1.4.3 The Third Generation Converters
1.4.3.1 Switched Capacitor Converters
1.4.3.2 Multiple-Quadrant Switched Capacitor
Luo-Converters
1.4.3.3 Multiple-Lift Push-Pull Switched Capacitor
Converters
1.4.3.4 Multiple-Quadrant Switched Inductor Converters
1.4.4 The Fourth Generation Converters
1.4.4.1 Zero-Current-Switching Quasi-Resonant
Converters
1.4.4.2 Zero-Voltage-Switching Quasi-Resonant
Converters
1.4.4.3 Zero-Transition Converters
1.4.5 The Fifth Generation Converters
1.4.6 The Sixth Generation Converters
1.5 Categorize Prototypes and DC/DC Converter Family Tree
References
2 Voltage-Lift Converters
2.1 Introduction
2.2 Seven Self-Lift Converters
2.2.1 Self-Lift Cúk Converter
2.2.1.1 Continuous Conduction Mode
2.2.1.2 Discontinuous Conduction Mode
2.2.2 Self-Lift P/O Luo-Converter
2.2.2.1 Continuous Conduction Mode
2.2.2.2 Discontinuous Conduction Mode
2.2.3 Reverse Self-Lift P/O Luo-Converter
2.2.3.1 Continuous Conduction Mode.
2.2.3.2 Discontinuous Conduction Mode
2.2.4 Self-Lift N/O Luo-Converter
2.2.4.1 Continuous Conduction Mode
2.2.4.2 Discontinuous Conduction Mode
2.2.5 Reverse Self-Lift N/O Luo-Converter
2.2.5.1 Continuous Conduction Mode
2.2.5.2 Discontinuous Conduction Mode
2.2.6 Self-Lift SEPIC
2.2.6.1 Continuous Conduction Mode
2.2.6.2 Discontinuous Conduction Mode
2.2.7 Enhanced Self-Lift P/O Luo-Converter
2.3 Positive Output Luo-Converters
2.3.1 Elementary Circuit
2.3.1.1 Circuit Description
2.3.1.2 Variations of Currents and Voltages
2.3.1.3 Instantaneous Values of Currents and Voltages
2.3.1.4 Discontinuous Mode
2.3.1.5 Stability Analysis
2.3.2 Self-Lift Circuit
2.3.2.1 Circuit Description
2.3.2.2 Average Current IC1 and Source Current IS
2.3.2.3 Variations of Currents and Voltages
2.3.2.4 Instantaneous Value of the Currents and
Voltages
2.3.2.5 Discontinuous Mode
2.3.2.6 Stability Analysis
2.3.3 Re-Lift Circuit
2.3.3.1 Circuit Description
2.3.3.2 Other Average Currents
2.3.3.3 Variations of Currents and Voltages
2.3.3.4 Instantaneous Value of the Currents and
Voltages
2.3.3.5 Discontinuous Mode
2.3.3.6 Stability Analysis
2.3.4 Multiple-Lift Circuits
2.3.4.1 Triple-Lift Circuit
2.3.4.2 Quadruple-Lift Circuit
2.3.5 Summary
2.3.6 Discussion
2.3.6.1 Discontinuous-Conduction Mode
2.3.6.2 Output Voltage VO versus Conduction Duty k
2.3.6.3 Switch Frequency f
2.4 Negative Output Luo-Converters
2.4.1 Elementary Circuit
2.4.1.1 Circuit Description
2.4.1.2 Average Voltages and Currents
2.4.1.3 Variations of Currents and Voltages
2.4.1.4 Instantaneous Values of Currents and
Voltages
2.4.1.5 Discontinuous Mode
2.4.2 Self-Lift Circuit
2.4.2.1 Circuit Description
2.4.2.2 Average Voltages and Currents
2.4.2.3 Variations of Currents and Voltages
2.4.2.4 Instantaneous Value of the Currents and
Voltages
2.4.2.5 Discontinuous Mode
2.4.3 Re-Lift Circuit
2.4.3.1 Circuit Description
2.4.3.2 Average Voltages and Currents
2.4.3.3 Variations of Currents and Voltages
2.4.3.4 Instantaneous Value of the Currents and
Voltages
2.4.3.5 Discontinuous Mode
2.4.4 Multiple-Lift Circuits
2.4.4.1 Triple-Lift Circuit
2.4.4.2 Quadruple-Lift Circuit
2.4.5 Summary
2.5 Modified Positive Output Luo-Converters
2.5.1 Elementary Circuit
2.5.2 Self-Lift Circuit
2.5.3 Re-Lift Circuit
2.5.4 Multi-Lift Circuit
2.5.5 Application
2.6 Double Output Luo-Converters
2.6.1 Elementary Circuit
2.6.1.1 Positive Conversion Path
2.6.1.2 Negative Conversion Path
2.6.1.3 Discontinuous Mode
2.6.2 Self-Lift Circuit
2.6.2.1 Positive Conversion Path
2.6.2.2 Negative Conversion Path
2.6.2.3 Discontinuous Conduction Mode
2.6.3 Re-Lift Circuit
2.6.3.1 Positive Conversion Path
2.6.3.2 Negative Conversion Path
2.6.3.3 Discontinuous Conduction Mode
2.6.4 Multiple-Lift Circuit
2.6.4.1 Triple-Lift Circuit
2.6.4.2 Quadruple-Lift Circuit
2.6.5 Summary
2.6.5.1 Positive Conversion Path
2.6.5.2 Negative Conversion Path
2.6.5.3 Common Parameters
Bibliography
3 Positive Output Super-Lift Luo-Converters
3.1 Introduction
3.2 Main Series
3.2.1 Elementary Circuit
3.2.2 Re-Lift Circuit
3.2.3 Triple-Lift Circuit
3.2.4 Higher Order Lift Circuit
3.3 Additional Series
3.3.1 Elementary Additional Circuit
3.3.2 Re-Lift Additional Circuit
3.3.3 Triple-Lift Additional Circuit
3.3.4 Higher Order Lift Additional Circuit
3.4 Enhanced Series
3.4.1 Elementary Enhanced Circuit
3.4.2 Re-Lift Enhanced Circuit
3.4.3 Triple-Lift Enhanced Circuit
3.4.4 Higher Order Lift Enhanced Circuit
3.5 Re-Enhanced Series
3.5.1 Elementary Re-Enhanced Circuit
3.5.2 Re-Lift Re-Enhanced Circuit
3.5.3 Triple-Lift Re-Enhanced Circuit
3.5.4 Higher Order Lift Re-Enhanced Circuit
3.6 Multiple-Enhanced Series
3.6.1 Elementary Multiple-Enhanced Circuit
3.6.2 Re-Lift Multiple-Enhanced Circuit
3.6.3 Triple-Lift Multiple-Enhanced Circuit
3.6.4 Higher Order Lift Multiple-Enhanced Circuit
3.7 Summary of Positive Output Super-Lift Luo-Converters
3.8 Simulation Results
3.8.1 Simulation Results of a Triple-Lift Circuit
3.8.2 Simulation Results of a Triple-Lift Additional Circuit
3.9 Experimental Results
3.9.1 Experimental Results of a Triple-Lift Circuit
3.9.2 Experimental Results of a Triple-Lift Additional Circuit
3.9.3 Efficiency Comparison of Simulation and Experimental
Results
Bibliography
4 Negative Output Super-Lift Luo-Converters
4.1 Introduction
4.2 Main Series
4.2.1 Elementary Circuit
4.2.2 N/O Re-Lift Circuit
4.2.3 N/O Triple-Lift Circuit
4.2.4 N/O Higher Order Lift Circuit
4.3 Additional Series
4.3.1 N/O Elementary Additional Circuit
4.3.2 N/O Re-Lift Additional Circuit
4.3.3 N/O Triple-Lift Additional Circuit
4.3.4 N/O Higher Order Lift Additional Circuit
4.4 Enhanced Series
4.4.1 N/O Elementary Enhanced Circuit
4.4.2 N/O Re-Lift Enhanced Circuit
4.4.3 N/O Triple-Lift Enhanced Circuit
4.4.4 N/O Higher Order Lift Enhanced Circuit
4.5 Re-Enhanced Series
4.5.1 N/O Elementary Re-Enhanced Circuit
4.5.2 N/O Re-Lift Re-Enhanced Circuit
4.5.3 N/O Triple-Lift Re-Enhanced Circuit
4.5.4 N/O Higher Order Lift Re-Enhanced Circuit
4.6 Multiple-Enhanced Series
4.6.1 N/O Elementary Multiple-Enhanced Circuit
4.6.2 N/O Re-Lift Multiple-Enhanced Circuit
4.6.3 N/O Triple-Lift Multiple-Enhanced Circuit
4.6.4 N/O Higher Order Lift Multiple-Enhanced Circuit
4.7 Summary of Negative Output Super-Lift
Luo-Converters
4.8 Simulation Results
4.8.1 Simulation Results of a N/O Triple-Lift Circuit
4.8.2 Simulation Results of a N/O Triple-Lift Additional
Circuit
4.9 Experimental Results
4.9.1 Experimental Results of a N/O Triple-Lift Circuit
4.9.2 Experimental Results of a N/O Triple-Lift Additional
Circuit
4.9.3 Efficiency Comparison of Simulation and Experimental
Results
4.9.4 Transient Process and Stability Analysis
Bibliography
5 Positive Output Cascade Boost Converters
5.1 Introduction
5.2 Main Series
5.2.1 Elementary Boost Circuit
5.2.2 Two-Stage Boost Circuit
5.2.3 Three-Stage Boost Circuit
5.2.4 Higher Stage Boost Circuit
5.3 Additional Series
5.3.1 Elementary Boost Additional (Double) Circuit
5.3.2 Two-Stage Boost Additional Circuit
5.3.3 Three-Stage Boost Additional Circuit
5.3.4 Higher Stage Boost Additional Circuit
5.4 Double Series
5.4.1 Elementary Double Boost Circuit
5.4.2 Two-Stage Double Boost Circuit
5.4.3 Three-Stage Double Boost Circuit
5.4.4 Higher Stage Double Boost Circuit
5.5 Triple Series
5.5.1 Elementary Triple Boost Circuit
5.5.2 Two-Stage Triple Boost Circuit
5.5.3 Three-Stage Triple Boost Circuit
5.5.4 Higher Stage Triple Boost Circuit
5.6 Multiple Series
5.6.1 Elementary Multiple Boost Circuit
5.6.2 Two-Stage Multiple Boost Circuit
5.6.3 Three-Stage Multiple Boost Circuit
5.6.4 Higher Stage Multiple Boost Circuit
5.7 Summary of Positive Output Cascade Boost Converters
5.8 Simulation and Experimental Results
5.8.1 Simulation Results of a Three-Stage Boost Circuit
5.8.2 Experimental Results of a Three-Stage Boost Circuit
5.8.3 Efficiency Comparison of Simulation and Experimental
Results
5.8.4 Transient Process
Bibliography
6 Negative Output Cascade Boost Converters
6.1 Introduction
6.2 Main Series
6.2.1 N/O Elementary Boost Circuit
6.2.2 N/O Two-Stage Boost Circuit
6.2.3 N/O Three-Stage Boost Circuit
6.2.4 N/O Higher Stage Boost Circuit
6.3 Additional Series
6.3.1 N/O Elementary Additional Boost Circuit
6.3.2 N/O Two-Stage Additional Boost Circuit
6.3.3 N/O Three-Stage Additional Boost Circuit
6.3.4 N/O Higher Stage Additional Boost Circuit
6.4 Double Series
6.4.1 N/O Elementary Double Boost Circuit
6.4.2 N/O Two-Stage Double Boost Circuit
6.4.3 N/O Three-Stage Double Boost Circuit
6.4.4 N/O Higher Stage Double Boost Circuit
6.5 Triple Series
6.5.1 N/O Elementary Triple Boost Circuit
6.5.2 N/O Two-Stage Triple Boost Circuit
6.5.3 N/O Three-Stage Triple Boost Circuit
6.5.4 N/O Higher Stage Triple Boost Circuit
6.6 Multiple Series
6.6.1 N/O Elementary Multiple Boost Circuit
6.6.2 N/O Two-Stage Multiple Boost Circuit
6.6.3 N/O Three-Stage Multiple Boost Circuit
6.6.4 N/O Higher Stage Multiple Boost Circuit
6.7 Summary of Negative Output Cascade Boost Converters
6.8 Simulation and Experimental Results
6.8.1 Simulation Results of a Three-Stage Boost Circuit
6.8.2 Experimental Results of a Three-Stage Boost Circuit
6.8.3 Efficiency Comparison of Simulation and Experimental
Results
6.8.4 Transient Process
Bibliography
7 Multiple Quadrant Operating Luo-Converters
7.1 Introduction
7.2 Circuit Explanation
7.2.1 Mode A
7.2.2 Mode B
7.2.3 Mode C
7.2.4 Mode D
7.2.5 Summary
7.3 Mode A (Quadrant I Operation)
7.3.1 Circuit Description
7.3.2 Variations of Currents and Voltages
7.3.3 Discontinuous Region
7.4 Mode B (Quadrant II Operation)
7.4.1 Circuit Description
7.4.2 Variations of Currents and Voltages
7.4.3 Discontinuous Region
7.5 Mode C (Quadrant III Operation)
7.5.1 Circuit Description
7.5.2 Variations of Currents and Voltages
7.5.3 Discontinuous Region
7.6 Mode D (Quadrant IV Operation)
7.6.1 Circuit Description
7.6.2 Variations of Currents and Voltages
7.6.3 Discontinuous Region
7.7 Simulation Results
7.8 Experimental Results
7.9 Discussion
7.9.1 Discontinuous-Conduction Mode
7.9.2 Comparison with the Double-Output Luo-
Converter
7.9.3 Conduction Duty k
7.9.4 Switching Frequency f
Bibliography
8 Switched Component Converters
8.1 Introduction
8.2 A Two-Quadrant SC DC/DC Converter
8.2.1 Circuit Description
8.2.1.1 Mode A
8.2.1.2 Mode B
8.2.2 Mode A (Quadrant I Operation)
8.2.3 Mode B (Quadrant II Operation)
8.2.4 Experimental Results
8.2.5 Discussion
8.2.5.1 Efficiency
8.2.5.2 Conduction Duty k
8.2.5.3 Switching Frequency f
8.3 Four-Quadrant Switched Capacitor DC/DC
Luo-Converter
8.3.1 Mode A (QI: Forward Motoring)
8.3.1.1 Mode A1: Condition V1>V2
8.3.1.2 Mode A2: Condition V1<V2
8.3.1.3 Experimental Results
8.3.2 Mode B (QII: Forward Regenerative Braking)
8.3.2.1 Mode B1: Condition V1>V2
8.3.2.2 Mode B2: Condition V1<V2
8.3.3 Mode C (QIII: Reverse Motoring)
8.3.4 Mode D (QIV: Reverse Regenerative Braking)
8.4 Switched Inductor Four-Quadrant DC/DC Luo-Converter
8.4.1 Mode A (QI: Forward Motoring)
8.4.1.1 Continuous Mode
8.4.1.2 Discontinuous Mode
8.4.2 Mode B (QII: Forward Regenerative Braking)
8.4.2.1 Continuous Mode
8.4.2.2 Discontinuous Mode
8.4.3 Mode C (QIII: Reverse Motoring)
8.4.3.1 Continuous Mode
8.4.3.2 Discontinuous Mode
8.4.4 Mode D (QIV: Reverse Regenerative Braking)
8.4.4.1 Continuous Mode
8.4.4.2 Discontinuous Mode
8.4.5 Experimental Results
Bibliography
9 Positive Output Multiple-Lift Push-Pull Switched-Capacitor
Luo-Converters
9.1 Introduction
9.2 Main Series
9.2.1 Elementary Circuit
9.2.2 Re-Lift Circuit
9.2.3 Triple-Lift Circuit
9.2.4 Higher Order Lift Circuit
9.3 Additional Series
9.3.1 Elementary Additional Circuit
9.3.2 Re-Lift Additional Circuit
9.3.3 Triple-Lift Additional Circuit
9.3.4 Higher Order Lift Additional Circuit
9.4 Enhanced Series
9.4.1 Elementary Enhanced Circuit
9.4.2 Re-Lift Enhanced Circuit
9.4.3 Triple-Lift Enhanced Circuit
9.4.4 Higher Order Enhanced Lift Circuit
9.5 Re-Enhanced Series
9.5.1 Elementary Re-Enhanced Circuit
9.5.2 Re-Lift Re-Enhanced Circuit
9.5.3 Triple-Lift Re-Enhanced Circuit
9.5.4 Higher Order Lift Re-Enhanced Circuit
9.6 Multiple-Enhanced Series
9.6.1 Elementary Multiple-Enhanced Circuit
9.6.2 Re-Lift Multiple-Enhanced Circuit
9.6.3 Triple-Lift Multiple-Enhanced Circuit
9.6.4 Higher Order Lift Multiple-Enhanced Circuit
9.7 Theoretical Analysis
9.8 Summary of This Technique
9.9 Simulation Results
9.9.1 A Triple-Lift Circuit
9.9.2 A Triple-Lift Additional Circuit
9.10 Experimental Results
9.10.1 A Triple-Lift Circuit
9.10.2 A Triple-Lift Additional Circuit
Bibliography
10 Negative Output Multiple-Lift Push-Pull
Switched-Capacitor Luo-Converters
10.1 Introduction
10.2 Main Series
10.2.1 N/O Elementary Circuit
10.2.2 N/O Re-Lift Circuit
10.2.3 N/O Triple-Lift Circuit
10.2.4 N/O Higher Order Lift Circuit
10.3 Additional Series
10.3.1 N/O Elementary Additional Circuit
10.3.2 N/O Re-Lift Additional Circuit
10.3.3 N/O Triple-Lift Additional Circuit
10.3.4 N/O Higher Order Lift Additional Circuit
10.4 Enhanced Series
10.4.1 N/O Elementary Enhanced Circuit
10.4.2 N/O Re-Lift Enhanced Circuit
10.4.3 N/O Triple-Lift Enhanced Circuit
10.4.4 N/O Higher Order Lift Enhanced Circuit
10.5 Re-Enhanced Series
10.5.1 N/O Elementary Re-Enhanced Circuit
10.5.2 N/O Re-Lift Re-Enhanced Circuit
10.5.3 N/O Triple-Lift Re-Enhanced Circuit
10.5.4 N/O Higher Order Lift Re-Enhanced Circuit
10.6 Multiple-Enhanced Series
10.6.1 N/O Elementary Multiple-Enhanced Circuit
10.6.2 N/O Re-Lift Multiple-Enhanced Circuit
10.6.3 N/O Triple-Lift Multiple-Enhanced Circuit
10.6.4 N/O Higher Order Lift Multiple-Enhanced Circuit
10.7 Summary of This Technique
10.8 Simulation and Experimental Results
10.8.1 Simulation Results
10.8.2 Experimental Results
Bibliography
11 Multiple-Quadrant Soft-Switch Converters
11.1 Introduction
11.2 Multiple-Quadrant DC/DC ZCS Quasi-Resonant
Luo-Converters
11.2.1 Mode A
11.2.1.1 Interval t = 0 to t1
11.2.1.2 Interval t = t1 to t2
11.2.1.3 Interval t = t2 to t3
11.2.1.4 Interval t = t3 to t4
11.2.2 Mode B
11.2.2.1 Interval t = 0 to t1
11.2.2.2 Interval t = t1 to t2
11.2.2.3 Interval t = t2 to t3
11.2.2.4 Interval t = t3 to t4
11.2.3 Mode C
11.2.3.1 Interval t = 0 to t1
11.2.3.2 Interval t = t1 to t2
11.2.3.3 Interval t = t2 to t3
11.2.3.4 Interval t = t3 to t4
11.2.4 Mode D
11.2.4.1 Interval t = 0 to t1
11.2.4.2 Interval t = t1 to t2
11.2.4.3 Interval t = t2 to t3
11.2.4.4 Interval t = t3 to t4
11.2.5 Experimental Results
11.3 Multiple-Quadrant DC/DC ZVS Quasi Resonant
Luo-Converter
11.3.1 Mode A
11.3.1.1 Interval t = 0 to t1
11.3.1.2 Interval t = t1 to t2
11.3.1.3 Interval t = t2 to t3
11.3.1.4 Interval t = t3 to t4
11.3.2 Mode B
11.3.2.1 Interval t = 0 to t1
11.3.2.2 Interval t = t1 to t2
11.3.2.3 Interval t = t2 to t3
11.3.2.4 Interval t = t3 to t4
11.3.3 Mode C
11.3.3.1 Interval t = 0 to t1
11.3.3.2 Interval t = t1 to t2
11.3.3.3 Interval t = t2 to t3
11.3.3.4 Interval t = t3 to t4
11.3.4 Mode D
11.3.4.1 Interval t = 0 to t1
11.3.4.2 Interval t = t1 to t2
11.3.4.3 Interval t = t2 to t3
11.3.4.4 Interval t = t3 to t4
11.3.5 Experimental Results
11.4 Multiple-Quadrant Zero-Transition DC/DC
Luo-Converters
11.4.1 Mode A (Quadrant I Operation)
11.4.2 Mode B (Quadrant II Operation)
11.4.3 Mode C (Quadrant III Operation)
11.4.4 Mode D (Quadrant IV Operation)
11.4.5 Simulation Results
11.4.6 Experimental Results
11.4.7 Design Considerations
Bibliography
12 Synchronous Rectifier DC/DC Converters
12.1 Introduction
12.2 Flat Transformer Synchronous Rectifier Luo-Converter
12.2.1 Transformer Is in Magnetizing Process
12.2.2 Switching-On
12.2.3 Transformer Is in Demagnetizing Process
12.2.4 Switching-Off
12.2.5 Summary
12.3 Active Clamped Synchronous Rectifier Luo-Converter
12.3.1 Transformer Is in Magnetizing
12.3.2 Switching-On
12.3.3 Transformer Is in Demagnetizing
12.3.4 Switching-Off
12.3.5 Summary
12.4 Double Current Synchronous Rectifier Luo-Converter
12.4.1 Transformer Is in Magnetizing
12.4.2 Switching-On
12.4.3 Transformer Is in Demagnetizing
12.4.4 Switching-Off
12.4.5 Summary
12.5 Zero-Current-Switching Synchronous Rectifier
Luo-Converter
12.5.1 Transformer Is in Magnetizing
12.5.2 Resonant Period
12.5.3 Transformer Is in Demagnetizing
12.5.4 Switching-Off
12.5.5 Summary
12.6 Zero-Voltage-Switching Synchronous Rectifier
Luo-Converter
12.6.1 Transformer Is in Magnetizing
12.6.2 Resonant Period
12.6.3 Transformer Is in Demagnetizing
12.6.4 Switching-Off
12.6.5 Summary
Bibliography
13 Multiple Energy-Storage Element Resonant Power
Converters
13.1 Introduction
13.1.1 Two-Element RPC
13.1.2 Three-Element RPC
13.1.3 Four-Element RPC
13.2 Bipolar Current and Voltage Source
13.2.1 Bipolar Voltage Source
13.2.1.1 Two Voltage Source Circuit
13.2.1.2 One Voltage Source Circuit
13.2.2 Bipolar Current Source
13.2.2.1 Two Voltage Source Circuit
13.2.2.2 One Voltage Source Circuit
13.3 A Two-Element RPC Analysis
13.3.1 Input Impedance
13.3.2 Current Transfer Gain
13.3.3 Operation Analysis
13.3.4 Simulation Results
13.3.5 Experimental Results
Bibliography
14 Π-CLL Current Source Resonant Inverter
14.1 Introduction
14.1.1 Pump Circuits
14.1.2 Current Source
14.1.3 Resonant Circuit
14.1.4 Load
14.1.5 Summary
14.2 Mathematic Analysis
14.2.1 Input Impedance
14.2.2 Components’ Voltages and Currents
14.2.3 Simplified Impedance and Current Gain
14.2.4 Power Transfer Efficiency
14.3 Simulation Results
14.4 Discussion
14.4.1 Function of the Π-CLL Circuit
14.4.2 Applying Frequency to this Π-CLL CSRI
14.4.3 Explanation of g > 1
14.4.4 DC Current Component Remaining
14.4.5 Efficiency
Bibliography
15 Cascade Double Γ-CL Current Source Resonant Inverter
15.1 Introduction
15.2 Mathematic Analysis
15.2.1 Input Impedance
15.2.2 Components, Voltages, and Currents
15.2.3 Simplified Impedance and Current Gain
15.2.4 Power Transfer Efficiency
15.3 Simulation Result
15.3.1 β = 1, f = 33.9 kHz, T = 29.5 μs
15.3.2 β = 1.4142, f = 48.0 kHz, T = 20.83 μs
15.3.3 β = 1.59, f = 54 kHz, T = 18.52 μs
15.4 Experimental Result
15.5 Discussion
15.5.1 Function of the Double Γ-CL Circuit
15.5.2 Applying Frequency to this Double Γ-CL CSRI
15.5.3 Explanation of g > 1
Bibliography
16 Cascade Reverse Double Γ-LC Resonant Power Converter
16.1 Introduction
16.2 Steady-State Analysis of Cascade Reverse Double
Γ-LC RPC
16.2.1 Topology and Circuit Description
16.2.2 Classical Analysis on AC Side
16.2.2.1 Basic Operating Principles
16.2.2.2 Equivalent Load Resistance
16.2.2.3 Equivalent AC Circuit and Transfer Functions
16.2.2.4 Analysis of Voltage Transfer Gain and the
Input Impedance
16.2.3 Simulation and Experimental Results
16.2.3.1 Simulation Studies
16.2.3.2 Experimental Results
16.3 Resonance Operation and Modeling
16.3.1 Operating Principle, Operating Modes and Equivalent
Circuits
16.3.2 State-Space Analysis
16.4 Small-Signal Modeling of Cascade Reverse Double Γ-LC RPC
16.4.1 Small-Signal Modeling
16.4.1.1 Model Diagram
16.4.1.2 Nonlinear State Equation
16.4.1.3 Harmonic Approximation
16.4.1.4 Extended Describing Function
16.4.1.5 Harmonic Balance
16.4.1.6 Perturbation and Linearization
16.4.1.7 Equivalent Circuit Model
16.4.2 Closed-Loop System Design
16.5 Discussion
16.5.1 Characteristics of Variable-Parameter Resonant
Converter
16.5.2 Discontinuous Conduction Mode (DCM)
Bibliography
Appendix: Parameters Used in Small-Signal Modeling
17 DC Energy Sources for DC/DC Converters
17.1 Introduction
17.2 Single-Phase Half-Wave Diode Rectifier
17.2.1 Resistive Load
17.2.2 Inductive Load
17.2.3 Pure Inductive Load
17.2.4 Back EMF Plus Resistor Load
17.2.5 Back EMF Plus Inductor Load
17.3 Single-Phase Bridge Diode Rectifier
17.3.1 Resistive Load
17.3.2 Back EMF Load
17.3.3 Capacitive Load
17.4 Three-Phase Half-Bridge Diode Rectifier
17.4.1 Resistive Load
17.4.2 Back EMF Load (0.5 2Vin < E < 2Vin)
17.4.3 Back EMF Load (E < 0.5 2Vin)
17.5 Three-Phase Full-Bridge Diode Rectifier
with Resistive Load
17.6 Thyristor Rectifiers
17.6.1 Single-Phase Half-Wave Rectifier with Resistive Load
17.6.2 Single-Phase Half-Wave Thyristor Rectifier with
Inductive Load
17.6.3 Single-Phase Half-Wave Thyristor Rectifier with Pure
Inductive Load
17.6.4 Single-Phase Half-Wave Rectifier with Back EMF
Plus Resistive Load
17.6.5 Single-Phase Half-Wave Rectifier with Back EMF
Plus Inductive Load
17.6.6 Single-Phase Half-Wave Rectifier with Back EMF Plus
Pure Inductor
17.6.7 Single-Phase Full-Wave Semicontrolled Rectifier
with Inductive Load
17.6.8 Single-Phase Full-Controlled Rectifier with Inductive
Load
17.6.9 Three-Phase Half-Wave Rectifier with Resistive Load
17.6.10 Three-Phase Half-Wave Thyristor Rectifier with Inductive
Load
17.6.11 Three-Phase Full-Wave Thyristor Rectifier with Resistive
Load.
17.6.12 Three-Phase Full-Wave Thyristor Rectifier with Inductive
Load
Bibliography
18 Control Circuit: EMI and Application Examples
of DC/DC Converters
18.1 Introduction
18.2 Luo-Resonator
18.2.1 Circuit Explanation
18.2.2 Calculation Formulae
18.2.3 A Design Example
18.2.4 Discussion
18.3 EMI, EMS and EMC
18.3.1 EMI/EMC Analysis
18.3.2 Comparison to Hard-Switching and Soft-Switching
18.3.3 Measuring Method and Results
18.3.4 Designing Rule to Minimize EMI/EMC
18.4 Some DC/DC Converter Applications
18.4.1 A 5000 V Insulation Test Bench
18.4.2 MIT 42/14 V 3 KW DC/DC Converter
18.4.3 IBM 1.8 V/200 A Power Supply
Bibliography

[ 本帖最后由 laobo 于 2008-11-20 21:09 编辑 ]

tqwang

谢谢楼主

luoxianliang

先收下了，谢谢楼主！

domerate

,感谢楼主